Kodak 305 manual Safety Precautions, Installation Locations, For Long Operating Life

Page 6

SAFETY PRECAUTIONS

DO NOT LEAVE THE PRINTING UNIT OPEN

When the printer is moved with the printing unit open, it may cause injury or damage.

CLOSE THE PRINTING UNIT FIRMLY

Take care not to pinch your hand when closing the printing unit. When the printing unit is not closed firmly, it may open during transportation and it may cause injury or damage.

DO NOT PUSH DOWN ON THE PRINTING UNIT OR THE DOOR

If you push down on the printing unit or the door when they are open, this printer may fall and it can cause damage or injury.

INSTALLATION LOCATIONS

MAINTAIN GOOD VENTILATION

Ventilation slots and holes are provided on the rear and both sides of this printer. Place the printer on a hard and level surface and keep a space between the printer and the walls to ensure proper ventilation. When putting the printer on the system rack, take a space between the printer and the back and sides of the rack.

SUITABLE LOCATIONS

Avoid shaky places or hot-springs areas where hydrogen sulfide and acidic ions are likely to be generated.

AVOID PLACES WITH HIGH HUMIDITY AND DUST

Do not place the printer at a high humidity and dusty locations. They can cause extensive damage to this printer. Avoid places where the printer is likely to be exposed to oily fumes and vapors.

AVOID PLACES LIKELY TO BE EXTREMELY HOT

Places exposed to direct sunlight, or near heating appliances can attain extremely high temperatures, which may deform the cabinet, or can become a prime cause of damage.

PLACE THE PRINTER ON A HORIZONTAL LEVEL

The printer is likely to be affected if it is placed in slanted conditions or in an unstable places.

PROTECT AGAINST DEW FORMATION

In extremely cold regions, if the printer is moved quickly from an extremely cold place to warmer one, dew is likely to be formed. If dew is formed, printing is not possible.

OPERATING AMBIENT TEMPERATURE RANGE

The operating ambient temperature range is 15°C - 30°C (59°F - 86°F) and the humidity of 30% - 80% RH. When using the printer on the system rack, be sure to keep this ambient temperature inside the rack.

Depending on the internal temperature, it may take some time to start printing.

PRECAUTIONS FEATURES PREPARATION TROUBLE- OTHERS

SHOOTING

FOR LONG OPERATING LIFE

UNSUITABLE MATERIALS FOR THE KODAK 305 PHOTO PRINTER

Coat flaking and deformation are likely to occur if the printer is wiped with chemical dusters, benzine, thinner or any other solvent, if rubber or PVC items are left in contact with the printer for extended duration, or if the printer is sprayed with insecticide.

CARE OF THE CABINET

Unplug and clean with a soft cloth slightly moistened with a mild soap and water solution. Allow to dry completely before operating. Never use petroleum base solutions or abrasive cleaners.

HEAD ABRASION

The thermal head, like the video head, wears out. When it is abraded, it becomes hard to print out fine details of the picture. In such a case, it is necessary to replace the thermal head. Consult with the sales dealer for replacing the head.

CONNECTING DEVICES

Read thoroughly “Operating Precautions” of the instruction booklets for the devices connected with the Kodak 305 Photo Printer. The power cord must be disconnected after printing is over.

CAUTION ON RELOCATING

When transporting this printer, make sure it is not likely to be subjected to impacts. They can be a prime cause for damage. Further, make sure to disconnect the power cord from the power outlet, and the cables from the connected devices.

CONTENTS

3

Page 5 Page 7
Image 6
Page 5 Page 7
Contents User’s Guide Contents InformationContents Contents Safety Precautions Protective MeasuresSafety Precautions Installation LocationsFor Long Operating Life Other Cautions Special Features Special FeaturesCarefully pull the printer up and out of the box UnpackingUnpacking Unwrap the packingFeatures and Functions Front PanelFeatures and Functions Rear PanelPrinter Setup Procedure Before printing, follow the printer setup listed belowBefore Operation Print Paper Installation Before OperationInstall the print paper into the printer Close the doorRibbon Installation Preparation TROUBLE- Others Shooting ContentsLoad the ribbon in the ribbon cassette as shown below Installation of the print paper and the ribbon is completed Push the printing unit to closeAfter Printing Handling of Paper / Ribbon KITBefore Printing Storage of Paper / Ribbon KITConnection with USB Data Signal Equipment Printer Driver InstallationConnecting to Personal Computer Example Error Messages and Countermeasures Indications on the Front Panel and CountermeasuresPress the Open button to open the printing unit Error Messages and CountermeasuresOvercoming Paper Jams Remove the print paperRepairing a Torn Ribbon Use the original packaging Before Calling for ServiceInstructions for Transportation Close the printing unit firmlyThermal Head Cleaning CleaningFilter Cleaning Precautions Features PreparationCleaning Platen Roller CleaningPaper Flange Cleaning Specifications SpecificationsContents of CD-ROM Kodak TM Kodak. All rights reserved. P/N 4J7879 919C176A40
Related manuals
Manual 16 pages 38.21 Kb

305 specifications

The Kodak 305 is a multifunctional digital printing solution designed to meet the demanding needs of commercial print businesses. It is known for its exceptional quality, speed, and versatility, making it a popular choice among professional printers.

One of the standout features of the Kodak 305 is its exceptional image quality, which is achieved through advanced imaging technologies. It employs Kodak’s proprietary thermal imaging technology, which ensures precise dot placement and a wide color gamut. The printer is capable of producing high-definition images with sharp details and vibrant colors, making it suitable for a variety of applications, from photo books to marketing materials.

The Kodak 305 also boasts impressive printing speeds, offering high-volume production capabilities while maintaining quality. With the ability to print on various media types, including glossy paper, matte finishes, and textured materials, it caters to a wide range of printing needs. It can seamlessly handle different formats and sizes, from small postcards to large posters, enhancing its versatility in a commercial setting.

Another significant characteristic of the Kodak 305 is its user-friendly design, which includes an intuitive touchscreen interface that simplifies operation. This feature allows operators to easily navigate print jobs, adjust settings, and monitor performance. Additionally, the printer offers robust connectivity options, including USB and network capabilities, enabling easy integration into existing workflows.

The Kodak 305 places a strong emphasis on sustainability as well. It is designed with energy-efficient technologies that minimize power consumption, reducing the overall environmental impact. Furthermore, Kodak’s commitment to using recyclable materials in its consumables also speaks to its eco-friendly approach.

In conclusion, the Kodak 305 is a powerful and flexible digital printing solution that excels in high-quality output, operational efficiency, and sustainability. Its cutting-edge technologies and user-centric design make it an ideal choice for commercial printers looking to enhance their offerings and meet the evolving demands of the market. With the Kodak 305, businesses can expect to achieve impressive results while ensuring a streamlined and eco-conscious printing process.
Top Page Image Contents