Return to Cover Page | Overview | Getting Ready | Printing | Appendices |
3 Aim the mobile telephone’s infrared port at the printer’s infrared data receiver and initiate data transfer from the telephone.
See the user guide for your mobile telephone for instructions for configuring the infrared data settings and for printing.
Up to approximately
20 cm (7.9 in.)
Hold the mobile telephone within 10 degrees of the sensor in any direction
The distance over which infrared signals can be transmitted and received varies according to the mobile telephone model and operating system.
While data is being transmitted, a screen similar to the following will appear in the printer’s LCD monitor and the indicator will blink green. If the transfer is not working well, reposition the mobile telephone closer and directly in front of the infrared data receiver and reinitiate the transfer.
The printer will begin printing after the transmission is complete.
Printing via a Bluetooth Connection
This section explains how to print images from a Bluetooth enabled mobile telephone.
Supported Devices
Check whether or not your mobile telephone has the required functions for Bluetooth enabled printing.
Requirement 1:
Requirement 2:
•Mail and address book information cannot be printed.
•Mobile telephone security settings prevent printing of images downloaded from the Internet and images downloaded from a URL sent by email.
•Movies cannot be printed.
•The printer may not be able to print images saved onto the memory card of some types of mobile telephones.
•The position and orientation (horizontal or vertical) of images for printing is set automatically by the printer. Since images are enlarged or reduced to fit the paper size, the edges of the image may be cropped with certain combinations of image and paper sizes.
•Data transmission times are long when the data sizes are large. Accordingly, it may take some time before printing starts.
Troubleshooting | Tasks and Index | 32 | Back | Next |