Before you Begin, Components | Epson C120 instruction

Epson C120/C110 Bulk Ink System Installation Instructions

Before you Begin

It is crucial that the OEM ink supplied with your printer is installed before you attempt to install your ChromaBlast inks. This allows for two things: First, it primes the ink delivery system, ensuring that the ChromaBlast ink will load more eas- ily. Second, it familiarizes you with the basic operation of your printer. Please see the EPSON Stylus C120/C110 Printer User’s Guide for instructions on installation and printing a nozzle check.

Please read this document thoroughly before installing

the system to prevent voiding your warranty.

Components

1. Bulk Ink Dampers + tubes

2. Plastic Arm with Velcro adhesive

3. 4 Plastic syringes for priming

4. 3 Plastic dividers

5. ChromaBlast C120 or C110 Driver

6. QuickConnect Box

7. ChromaBlast Ink bags (Not included with QuickConnect system)

8. Printer

Quick Connect Bulk Ink System Setup Instructions

►►

1.Remove the soft protective cap from each ink bag. Depress the metal tab on the inside of the Quick Connect box and insert the plastic ink valve into place. Release the metal tab to lock the bag into place. Insert the black plastic dividers to separate between the four ink bags.

Note— There are 5 (five) bulk ink dampers, but only 4 ink bags. Two dampers are sup- plied by the Black ink bag. The Black ink bag has a “Y” tube splitter that fills both black ink dampers.

2. Set the bulk ink dampers face down on a flat	3. Slowly extract the plunger. Ink will start to
surface with the round openings facing up.	flow through the tubing into the damper. Con-
Pierce the thin plastic tab that covers the open-	tinue extracting the plunger until ink begins to
ing using the tip of a sharp object such as a	flow into the tip of the syringe.
ball point pen. Firmly insert the tip of the plastic	Note: You may have to repeat this process
syringe into the gasketed opening until the tip	twice to complete the priming of each ink
is completed inserted.	damper.
Note -The plunger needs to be pushed in	Repeat this process for the other three ink
and completely inserted into the syringe.	Repeat this process for the other three ink
	bags.

Once the ink bags have been connected your Quick Connect bulk ink system should look like the graphic on the left.

Turn to page two for detailed instructions on how to connect the Quick Connect bulk ink system to your Epson C120 printer.

Page 1