Specifications
Continual improvement policy
Arcam has a policy of continual improvement for its products. This means that designs and specifications are subject to change without notice.
Continuous power output (1kHz at 0.1% THD)
Single zone, both channels, 8Ω | 80W rms |
Single channel, 4Ω | 116W rms |
Harmonic distortion, 80% power, 8Ω at 1kHz | 0.01% |
Power output, all zones all channels driven, 8Ω at 1kHz, 0.1% THD+N | 65W rms per channel |
Inputs
Nominal sensitivity
Input impedance
Signal/noise ratio (CCIR, 45W)
General
11kΩ
101dB
Mains voltage | |
Power consumption (maximum) | 600W |
Heat dissipation (maximum) | 1,715 BTU/h |
Power consumption, idle | MZ12: 110W; MZ8: 73W |
Heat dissipation, idle | MZ12: 375BTU/h; MZ8: 256 BTU/h |
Power consumption, standby | 0.6W |
Heat dissipation in standby | 2 BTU/h |
Dimensions W x D x H (including feet, excluding rack ears and connectors) | 432mm x 436.5mm x 144.5mm (19” rackmount x 3U) |
Weight (net) | MZ12: 24.7 Kg; MZ8 19.3 Kg. |
Weight (packed) | MZ12: 27.3 Kg; MZ8 21.9 Kg. |
Supplied accessories | mains lead |
E&OE |
|
NOTE: All specification values are typical unless otherwise stated. |
|
Product
Guarantee
Worldwide Guarantee
This entitles you to have the unit repaired free of charge, during the first two years after purchase, at any authorised Arcam distributor provided that it was originally purchased from an authorised Arcam dealer or distributor. The manufacturer can take no responsibility for defects arising from accident, misuse, abuse, wear and tear, neglect or through unauthorized adjustment and/or repair, neither can they accept responsibility for damage or loss occurring during transit to or from the person claiming under the guarantee.
The warranty covers:
Parts and labour costs for two years from the purchase date. After two years you must pay for both parts and labour costs. The warranty does not cover transportation costs at any time.
On-line registration
You can register your product
Claims under guarantee
This equipment should be packed in the original packing and returned to the dealer from whom it was purchased, or failing this, directly to the Arcam distributor in the country of residence.
It should be sent carriage prepaid by a reputable carrier – not by post. No responsibility can be accepted for the unit whilst in transit to the dealer or distributor and customers are therefore advised to insure the unit against loss or damage whilst in transit.
For further details contact Arcam at:
Arcam Customer Support Department, Pembroke Avenue,
Waterbeach,
CAMBRIDGE, CB25 9QR, England
or via www.arcam.co.uk.
Problems?
If your Arcam dealer is unable to answer any query regarding this or any other Arcam product please contact Arcam Customer Support at the above address and we will do our best to help you.
12