Preparations

Attaching the CA-755/755P to a BETACAM SX Camcorder or a Digital BETACAM Camcorder

When the CA-755/755P is attached to the BETACAM SX Camcorder or the Digital BETACAM Camcorder, the 40-pin connector and battery connector on the CA- 755/755P are connected to identical connectors on the BETACAM SX Camcorder or the Digital BETACAM Camcorder. Electrical power and signals are transmitted through these connectors.

Note

Before attaching the CA-755/755P to the BETACAM SX Camcorder, or the Digital BETACAM Camcorder, make sure that the Camcorder is on a flat and stable surface.

1 Align the convex part of the 40-pin connector of the CA-755/755P with the concave part at the rear of the Camcorder, and the battery connector of the CA-755/755P with the 5-pin connector of the Camcorder.

Back of the DVW-700/700P/

700WS/700WSP

CA-755/755P

Remove cover.

Battery connector

40-pin connector

2 Place the CA-755/755P against the rear of the Camcorder so that there is no space between them.

5-pin connector

40-pin connector

Make sure that there is no space.

3 Make sure that the CA-755/755P is correctly aligned by attempting to shift it slightly right and left.

4 Push the CA-755/755P downwards while making sure that the guide shaft of the CA-755/755P locates with the guide hole of the Camcorder.

Guide shaft

Guide hole

7(E)