InstallationA32 integrated ampliﬁer

Installation:A32 integrated ampliﬁer

VOLTAGE

SELECT

POWER INLET	115/230V

TRIG

OUT

REMOTE

PHONO

SP2

4 – 16 OHMS		L	L							MM
		L	L							MC
	SP1	INTEGRATED
	SP1	R
+ R –	+ L –	R	R
			R
		PWR IN PRE OUT PRE/PWR	RECORD	PLAY	RECORD	PLAY
			OUT	IN	OUT	IN
			TAPE/PROC		VCR/TAPE 2		DVD	AV	TUNER CD	AUX

1 2 3

5 6 7 8 9 bk bl bm bn bo bp bq br

POSITIONING THE UNIT

Place your amplifier on a level, firm surface.

Avoid placing the unit in direct sunlight or near sources of heat or damp.

Ensure adequate ventilation. Do not place the unit in an enclosed space such as a bookcase or cabinet as both of these will impede air flow through the ventilation slots.

CONNECTING TO LOUDSPEAKERS

You can connect one or two pairs of loudspeakers to your amplifier, provided each pair is rated between 8–16Ω . If one or both pairs have an impedance of less than 8Ω , the combined load on the amplifier falls below 4Ω and could cause an overload. If so, the overload protection circuit engages and the amplifier will not work.

To connect one pair of loudspeakers, use the SP1 terminals.

SP1 and SP2 terminals 4

Both sets of loudspeaker terminals can be switched off by pressing the MUTE button on the remote control.To switch SP1 and SP2 independently, use the front panel switch 7 (see page 7) or the remote control (see page 10).

Your amplifier is fitted with loudspeaker terminals to BFA (British Federation of Audio) standard specification.

+	–	Arcam A32 amplifier	–
+	–	+	–
	R		L
+	–	+	–
Right			Left
speaker			speaker

Wiring your loudspeakers

Connect the right speaker to the terminals on the back of your amplifier marked R and the left speaker to the terminals marked L.

Connect your loudspeakers so that the red (positive/+) terminal on each loudspeaker is connected to the red (positive/+) terminal on the amplifier. Your loudspeaker cables may be marked to show polarity (negative/– and positive/+), if not, then the positive terminal can usually be identified by a ridge or coloured marking.

Now connect your loudspeakers’ black (negative/–) terminals to the black (negative/–) terminals on the amplifier.

Ensure that no stray strands of inner wires are allowed to touch another cable or the amplifier’s casing. This can cause a short circuit and damage your amplifier!

BFA loudspeaker terminals

The terminal will accept spade terminals, bare wires or a BFA plug. BFA plugs are available from your Arcam dealer.To connect a bare wire or spade terminal, unscrew the red (or black) part of the loudspeaker terminal first.

Insert the wire or spade terminal and screw it back up.

CAUTION: Do not over tighten the loudspeaker terminals or use a wrench, pliers, etc., as this could cause damage to the terminals which will not be covered under warranty.

A32 specifications

The Arcam A32 is a premium integrated amplifier that exemplifies high-fidelity audio reproduction, blending exceptional performance with user-friendly features. This amplifier is designed for audiophiles who appreciate fine sound quality and precise engineering.

One of the standout features of the Arcam A32 is its extensive connectivity options. It includes multiple analog inputs, enabling users to connect various source components such as CDs, turntables, or streaming devices. Additionally, the A32 offers a dedicated phono stage, which is ideal for vinyl enthusiasts seeking to achieve optimal sound quality from their records. The amplifier also supports a range of digital inputs, making it possible to connect digital sources like computers, network players, and televisions.

The A32 boasts a powerful output, delivering 80 watts per channel into 8 ohms, which is sufficient to drive a wide array of speakers with ease. Its Class G amplification technology ensures high efficiency while maintaining audio fidelity. This design allows for lower distortion levels and better thermal management compared to conventional Class AB amplifiers. The result is a cleaner and more dynamic sound across various volume levels.

Another significant characteristic of the Arcam A32 is its use of high-quality components. The amplifier features advanced capacitors and high-performance transistors that contribute to its impressive audio clarity and detail. Furthermore, the meticulous build quality reflects Arcam’s commitment to excellence, resulting in a product that not only sounds great but also lasts over time.

User convenience is also a priority with the A32. It comes with a remote control that allows for easy access to settings and volume adjustments from across the room. The intuitive interface on the front panel provides straightforward navigation between input sources, making it accessible for users of all levels.

In summary, the Arcam A32 represents a noteworthy option for those seeking an integrated amplifier that prioritizes sound quality, versatility, and user-friendliness. With its powerful output, extensive input options, and superior build quality, the A32 continues to be a popular choice among audio enthusiasts looking to create an immersive listening experience. Its combination of advanced technology and refined design makes it a deserving centerpiece in any high-fidelity audio setup.