Recording
Recording Movies
Before You Begin Recording
Make a test recording first to check if the camcorder operates correctly. If necessary, clean the video heads (
2).
(
9)
1Move the lens cover switch down to 
to open the lens cover.
2Holding the lock button pressed
down, set the 
switch to
CAMERA.
3Press Start/Stop to begin recording. Press Start/Stop again to pause the recording.
Recording 23
TO REVIEW THE LAST SCENE RECORDED
|
| EXP |
|
| |
|
| FOCUS |
| ||
1 | Set the mode switch to . | Basic | |||
2 | If the joystick guide does not appear | ||||
| |||||
3 | on screen, press ( | ) to display it. |
| ||
Push the joystick ( | ) momentarily | Functions | |||
| and return to record pause mode. | ||||
| towards | and release it. |
| ||
• The camcorder will play back a few seconds of the last recording made
• You can also hold the joystick pressed (
) towards 
or ( 
) towards 
to play back the tape (reverse or forward respectively) to locate the point where you want to start recording.
WHEN YOU HAVE FINISHED RECORDING
1Close the lens cover and the LCD panel.
2Turn off the camcorder.
3Remove the tape.
4Disconnect the power source and remove the battery pack.
NOTES
About the recording time: By changing the recording mode you can change the video