Canon 600 instruction manual Tape operation-Recording, Tape operation-Playback

Problem	Solution
“REMOVE THE CASSETTE”	Unload and reload the cassette.	20
appears on the screen.
“SET THE TIME ZONE,	Set the time zone, date and time.	26
DATE AND TIME” appears on	Recharge the built-in lithium battery and set the time zone,	135
the screen.
	date and time.
The wireless controller will not	Set [WL.REMOTE] to [ON].	69
work.	The battery of the wireless controller is exhausted. Replace	23
	the battery.

E

Tape operation-Recording

Problem	Solution
Image will not appear on the	Set the camcorder to CAMERA•	mode.	28
screen.
Pressing the start/stop button	Set the camcorder to CAMERA•	mode.	28
will not start recording.	Load a cassette.		20
	Tape reached the end (“ END” flashes on the screen).		20
	Rewind the tape or replace the cassette.
	Cassette is protected (“ ” flashes on the screen). Change		134
	the position of the protect switch.
Sound is distorted.	When recording near loud sounds (such as fireworks, drums		71
	or concerts), sound may become distorted. Sound may be
	recorded properly when you set [MIC ATT] to [ON] in the
	menu, or when you adjust the audio recording level manually.
Sound is recorded in a lower	When recording near loud sounds (such as fireworks, drums		71
level than the actual level.	or concerts), sound may be recorded not in the actual sound
	level. Sound may be recorded properly when you adjust the
	audio recording level manually.
	Set [MIC ATT] to [OFF] in the menu.		67

Tape operation-Playback

Problem		Solution
Pressing the playback button	Set the camcorder to PLAY(VCR)•		mode.	35
does not start playback.	Load a cassette.			20
	Tape reached the end (“	END” flashes on the screen).		35
	Rewind the tape.
Image will not appear on the	Set [AV DV/ ] to [OFF].			66
TV screen.
Tape is running, but image will	TV/VIDEO selector on the TV is not set to VIDEO. Set the			39
not appear on the TV screen.	selector to VIDEO.
	Video heads are dirty. Clean the video heads.			137
	You attempted to play back or dub copyright protected tape.			–
	Stop playback/dubbing.
No sound from the built-in	Speaker volume is turned off. Adjust the volume with the SET			38
speaker.	dial.
The tape stops during	When playback pause continues for more than 4 minutes 30			–
playback pause.	seconds during playback or audio dubbing, the camcorder
	shuts off to protect tape and video heads. Playback the tape
	again and press the /	pause button.

Trouble?

127