Canon DC22 No disc is loaded. Insert a disc, Or Secam, Could not recover a corrupted file

96 Trouble?

	Message		Explanation
NO DISC		No disc is loaded. Insert a disc.		25
		This message can also appear if condensation has formed. Wait		102
		until the camcorder dries completely before resuming use.
		You inserted a disc recorded in a different Television System (PAL		–
		or SECAM).
LOADING THE DISC		The disc is being read. Wait before you start recording.		–
AVOID MOVING THE		Try not to move the camcorder while the image is being recorded.		–
CAMCORDER
UNABLE TO RECOVER		Could not recover a corrupted file.		–
DATA
		This message can also appear if condensation has formed. If you		102
		suspect condensation is the reason, do not initialize the disc and
		wait until the camcorder dries completely before resuming use.
DISC FULL		The disc is full (“	END” flashes on the screen) . Delete some	25
		recordings (DVD-RW in VR mode) to free some space or replace		63
		the disc.
NO CARD		Memory card not is inserted into the camcorder.		24
NO IMAGES		No images are recorded on the memory card.		–
CARD ERROR		A memory card error occurred. The camcorder cannot record or		–
		display the image.
		The error may be temporary. If the message disappears after 4
		seconds and “	” flashes red, turn the camcorder off, remove the
		card and reinsert the card. If “ ” changes to green, you can
		continue recording/playback.
CARD FULL		Memory card is full. Erase some images to free some space or		67
		replace the memory card.
NAMING ERROR		The folder and file numbers have reached their maximum value.		–
		Set the [FILE NOS.] option to [RESET] and initialize the disc or
		memory card, erase all the images on the memory card or replace
		the disc.
UNIDENTIFIABLE IMAGE		The image file is corrupted or it was saved using a compression		–
		method other than that compatible with this camcorder (JPEG).
	TRANSFER ORDER	You attempted to set more than 998 transfer orders.		84
ERROR
TOO MANY STILL IMAGES		Disconnect the USB cable and decrease the number of still images		–
DISCONNECT USB CABLE		on the memory card or disc to less than 1800. Images cannot be
		erased from a DVD-R/DVD-R DL or DVD-RW disc recorded in
		VIDEO mode.
		If a dialog appeared on the computer screen, close it and then
		reconnect the USB cable.