Canon GL1 instruction manual Maintenance, Storage

Page 89

Maintenance

Cautions

Avoid high temperatures and high humidity.

Do not leave the camera inside a car in hot weather, for example.

Be careful of heat radiating from video lighting equipment.

Do not take the camera into a humid room.

Avoid sudden changes in temperature.

If you take the camera from a cold place to a warm place, condensation may form on the lens and internal parts (see p. 91).

Do not point the lens or viewfinder at strong light sources.

Never point it at the sun, and do not leave it aimed at a bright subject.

Be especially careful when leaving the camera on a tripod.

Avoid magnetic or electric fields.

Do not use the camera close to TV transmitters, portable communication devices or other sources of electric or magnetic radiation. They may cause picture interference, or permanently damage the camera.

Do not expose the camera to water.

Cover the camera when you are recording in rain or mist.

There is a risk of electric shock if water gets inside the camera — contact qualified service personnel as soon as possible.

Protect the lens.

• Sand and dust can damage the lens — be especially careful on windy days.

Handle the camera gently.

Vibration or shock can cause damage.

Do not use the viewfinder, LCD panel or microphone as a carrying handle.

Do not swing the camera around when carrying it by the handle; knocking the camera against things may cause it to malfunction.

Do not disassemble the camera.

This is very dangerous as there is a risk of electric shock — if the camera does not function properly, take it to qualified service personnel.

E

Storage

If you do not intend to use the camera for some time, turn the POWER switch to OFF and store it in an area which is free of dust and moisture, and where the temperature is no higher than 86°F (30°C). After storage, check each part and function of your camera to make sure everything is still working properly.

Note:

• These cautions also apply to accessories such as battery packs and cassettes.

Information

Additional

89

Image 89
Contents Mode d’emploi Introduction Important Usage InstructionsImportant Safety Instructions Introduction Contents Getting started Thank you for Choosing a CanonIntroducing the GL1 OverviewQuick Finding Your Way Around the GL1Quick Overview Quick Overview Slow GL1 System Diagram Availability differs from area to area Battery Packs Optional AccessoriesCB-900 Car Battery Adapter WD-58 Wide-converterCH-910 Dual Battery Charger/ Holder VL-10Li Battery Video LightHC-4000 System Case 220EX Speedlite 380EX Speedlite 550EX SpeedliteFinally, tighten the locking screw Attaching the Lens HoodRemove the lens cap Connecting the camera to an AC outlet Powering the GL1Provide power from an AC outlet or Charge a battery pack Attach the DC coupler to the cameraRemove the battery pack after use Charging and attaching the battery packAttach the battery pack to the power adapter CA-910 Compact Power Adapter Load or unload the cassette Loading a CassetteLoading and unloading Cassette memory Protecting tapes from accidental erasureHandling cassettes To record Using the Standby leverBefore you start recording Changing the recording mode SP/LP When you have finished recordingTurning the camera recording displays ON/OFF Demonstration modeMicrophone attenuator Confirmation/Warning beeps40⋅/100⋅ digital zoom Zooming20⋅ optical zoom Changing the angle of the LCD screen Using the LCD ScreenOpen the LCD screen About the LCD Screen Adjusting the LCD screenAllowing the subject to monitor recording Built-in speaker and headphone terminal Playing Back a Cassette Attach a power source and slide the Power switch to VCRLoad the cassette Press the Play e button to start playback Other playback modesSpecial playback If your TV or VCR has audio/video input terminals Connections for Playback on a TV ScreenIf your TV or VCR has an S-video input terminal Tips for Making Better Videos Using a tripodHolding the camera Sound recordingCamera moves CompositionPicture angle Turning the Optical Image Stabilizer Off VCR menu Selecting from the MenusMenu Inserting batteries Using the Wireless Controller/Tally LampSetting the remote sensor mode Turning off the tally lamp Setting the time zone/daylight saving time Setting the Date and TimeSet the camera to record pause mode Open the menu and select T.ZONE/DST Press the menu dialSetting the clock Six-second auto date Setting the display styleDate and time display Filter Using the ND FilterPress the Photo button fully down to take the still picture Taking Still Pictures Photo ModeUsing the Full Range of Features Flash Charging Using a Canon Speedlite for Flash Photography optionalChoosing the Movie Mode Normal/Frame Record review Searching and Reviewing While RecordingRecord search Availability of functions in each recording program Using the Various Recording ProgramsEasy Recording Giving priority to shutter speed shutter-priority Tv AutoManual See also p Giving priority to the aperture aperture-priority AvSand & Snow SpotlightUsing Digital Effects Press the D.E. ON/OFF button Operating the digital effectsPress the start/stop button to start/stop recording Widescreen TV recordingWind screen Selecting the audio modeAudio Recording Press the start/stop button to end recording Setting the Self-TimerPress the start/stop button Press the Exposure dial in again Manual Exposure AdjustmentTurn the Exposure dial to open or close the iris Press the Exposure dial in once moreAbout the shutter speed Exposure lock Exposure lock/adjustmentManual focus Adjusting the FocusTemporary focus override Close the menu Using AE ShiftAdjusting Camera Sharpness Adjusting Color Phase Using the Zebra Pattern To set the white balance manually Adjusting the White BalanceSetting the white balance Using the Full Range of Features Displaying Data Code Date/Time Searching the Tape Photo Search/Date Search Returning to a Pre-Marked Position Dubbing Function Setting the camera to control your VCRPreparing for Dubbing Connect the camera to the VCRSetting Recorder Using the Dubbing Function for the First TimePreparations & setting up Recorder Press e on the body of the camera Make sure you are in DUB Mode see pDubbing to a VCR Setting the Cut-In and Cut-Out Adjustments Cut-In and Cut-Out AdjustmentsOpen the REC.SET UP menu and point the arrow at CUT-IN ADJ Adjust the settingPreparations Simple Editing to a VCRPrepare the TV and VCR Basic editingDV terminal/connections Copyright signalDubbing with Digital Video Equipment Connect the camera to the VCR, TV or other camcorder Recording from a VCR, TV or Other Camcorder Analog Line-inRepeat steps 1 to 5 until your edited recording is complete Press the pause buttonPlayback tape Recording Over Existing Scenes A/V Insert EditingTape in the camera Press the stop button of the VCR Press the A/V Insert button on the wireless controllerTo connect the external microphone Audio DubbingTo connect other audio equipment Press Audio DUB. on the wireless controller Adjust the grip belt Adjust the viewfinderPreparing the Camera Attach the shoulder strapRemaining time indicator How much power is left?When to recharge Charging and recording timesCharging the backup battery Taking care of the battery packKeep the terminals clean Storing the battery packTreat the battery pack with care Set the camera to VCR mode Choose the output Setting the Audio MixSelecting audio output channels Choose the grip Camera Holding StylesStandard holding style Low-angle recordingStorage MaintenanceUsing the camera abroad MaintenanceCondensation What happens when condensation is detectedProtecting the camera from condensation What you should doRecording/Playback Troubleshooting? The camera turned itself off ? The start/stop button doesn’t workRecording/Playback Contd About the CCD MiscellaneousAbout the LCD Viewfinder Turning off the LCD screen displays Screen DisplaysTurned on p Manua L Recording reminder Time CodeBP-915 Battery Pack Specifications100 Index101 Canon U.S.A., Inc Canon GL1 Digital Video Camcorder Limited WarrantyCanada Canon INC