Reviewing and Searching when Recording
Program selector
Joystick 
Record Review
In record pause mode, this function allows you to review the last few seconds of your recording to check if it has been recorded properly.
1.Set the program selector to 
.
2.If the joystick guide does not appear on screen, press ( 
) to display it.
3.Push the joystick (
) momentarily towards 
and release it.
The camcorder rewinds the tape, plays back the last few seconds, and returns to record pause mode.
EXP
FOCUS
Record Search
In record pause mode, this function allows you to play back the tape (forward or reverse) to locate the point where you wish to begin recording.
1.Set the program selector to 
.
2.If the joystick guide does not appear on screen, press ( 
) to display it.
3.Hold the joystick pushed (
) towards 
to search back towards the beginning of the recording or
pushed (
) towards 
to search forward towards the end of the recording.
EXP
FOCUS
•Release the joystick at the point where you wish to begin recording.
•The camcorder returns to record pause mode.
20