Troubleshooting
Problem
Possible Cause
Try This
Low Ink Warning Accompanied by Ink Tank Icon With a '?'
Failure to reset ink counter when installing new ink tank
The ink tank level accompanied by the ink tank icon with the “?” indicates ink tank is not synchronized with its ink counter.
Always be sure to reset the ink counter in your printer driver when you replace an ink tank. See "Resetting the Ink Counter" on page 64.
Note | A “?” is displayed next to the Ink counter between the time one |
| ink tank is removed and the ink counter is reset when the next |
| one is installed. When you want to suspend the ink replacing |
| message and “?”, change a setup in accordance with the |
| following process. |
1.Ensure that the printer is turned on.
2.Open the Printer Properties dialog box.
See "Opening the Printer Properties Dialog Box Directly from the Start Menu" on page 29
3.Click the Maintenance tab and then click Low Ink Warning Setting icon.
4.Clear a check box of Display low ink warning off and click Send.
5.When the confirmation message is displayed, click OK.
1.Ensure that the printer is connected with the computer by USB cable.
2.Ensure that the printer is turned on.
3.
4.
If you are using an OS other than Mac OS X v.10.3, double- click the Print Center icon.
5.Select iP90 from the Name list and click Utility or Configure.
6.Select iP90 from the Product list and click Maintenance.
7.Select Remaining ink level setting from the
8.Clear the check box of Display the Remaining Ink Level and click Send.
9.When the confirmation message is displayed, click OK.
80