Canon CP-100 manual Print receptacle or out

Error Message	Cause	Correction
Paper Jam	Paper jammed during printing.	Press the ON/OFF button until
		the indicator light turns off and
		press it again until the printer
		turns on.
		• With postcard size and L size
		paper, the printer should
		respond by automatically
		ejecting the jammed sheet into
		the print receptacle or out
		through the paper handling
		slot. If the printer fails to eject
		the paper, contact a Canon
		Customer Support help desk
		for assistance.
		• With card size paper, remove
		the paper cassette, insert your
		finger in the paper-retrieving
		hole under the printer and
		push the paper out.
Paper has been changed.	Paper was changed after the	Change back to the original
	print menu was displayed.	paper size or change the print
		settings.
Recharge the printer battery	The printer’s battery pack is	Change it with a fully charged
	depleted.	battery pack or recharge the
		battery pack.
Communication Error	Error in communication between	Press the ON/OFF button until
	printer and camera.	the indicator light turns off and
		press it again until the printer
		turns on. If the error message
		does not clear, contact a Canon
		Customer Support help desk for
		assistance.
Cannot Print!	The image was taken with a	Check whether the image’s size
	different camera, recorded in a	matches the camera’s pixel
	different format, or has been	capacity. If the size is not
	altered by a computer.	appropriate, resize the image
		and convert as necessary so
		that the image is in a JPEG
		format that the camera can
		display.

32