Rogue Audio Sixty Six manual

4)Connections to other components - Connections are shown in Figure 1. The input connections for source material (phonograph, CD player, tuner, tape recorder) are made via RCA auxiliary jacks are also available for line level sources (approximately 1 volt). A five way lug is also provided for grounding the turntable to the preamplifier. The outputs to the power amplifier and tape recorder are arranged to the right of the input jacks. The tape output (as shipped) is passive, however it can be configured as an active outputs for powering a subwoofer or second amplifier. To do so, remove the cover and find the two small black slide switches on the rear (RCA jack) circuit board. Refer to figures 2 and 3 for approximate locations of these switches. The two positions are labeled “A” for active and “P” for passive modes. Simple slide the two switches to the “A” position and the tape output will become active.

WARNING : If unit has been powered up, you must turn off the switch and wait at least one hour before disconnecting the electrical cord. After doing so, the unit may be unplugged and the top cover removed. This time is required for dangerous voltages to dissipate to ground.

5)Polarity - The Rogue sixty-six preamplifier is an inverting amplifier (positive signal in gives negative signal out) so, for best sound, care should be taken to ensure correct polarity at the speaker terminals. If your power amplifier is also inverting, then connect the positive (+) outputs of your power amplifier to the positive(+) terminals of the loudspeakers and the negative (-) outputs to the (-) negative loudspeaker terminals. If your power amplifier is non-inverting, then connect the positive outputs (+) of your power amplifier to the negative (-) loudspeaker terminals, and the negative outputs (-) to the positive (+) loudspeaker terminals. If you are unsure as to the polarity of your power amplifier, check the owners manual or contact the manufacturer. If all else fails, try both connections and listen to which sounds better (do this using several different recordings as not all recordings are made with correct phase).

Rogue Sixty Six Owners Manual

Sixty Six specifications

Rogue Audio Sixty Six is a celebrated tube amplifier that has made its mark in the audiophile community due to its remarkable combination of performance, build quality, and aesthetic appeal. Designed to cater to both novice enthusiasts and seasoned audiophiles, the Sixty Six represents a fine blend of vintage warmth and modern engineering.

One of the standout features of the Rogue Audio Sixty Six is its use of high-quality vacuum tubes in the signal path. This amplifier typically employs a configuration of 12AX7, 12AU7, and 6CA7 (EL34) tubes, which contribute to its rich and musical sound signature. The tube lineup not only enhances the overall audio experience but also infuses a sense of warmth and depth that solid-state amplifiers often struggle to replicate.

The Sixty Six boasts a powerful output of 50 watts per channel in ultralinear mode and can be switched to triode mode for those seeking a more intimate sound. In triode mode, the amplifier delivers a softer and more focused presentation, making it ideal for smaller rooms and sensitive speakers. This versatility allows users to tailor their listening experiences according to their preferences and listening environments.

Additionally, Rogue Audio has equipped the Sixty Six with a robust, all-metal chassis that not only houses its internal components securely, but also minimizes vibrations. The attention to build quality is evident in the inclusion of high-quality components such as capacitors and transformers, designed to ensure reliability and longevity.

Another notable aspect is the inclusion of a remote control, which makes it easy for users to adjust volume levels from the comfort of their listening position. The amplifier also features multiple inputs, allowing for seamless integration with various source components.

The aesthetic design of the Sixty Six is equally impressive, with its stylish, retro-inspired look that incorporates polished chrome and a distinctive front panel. The combination of performance and elegance makes it a standout piece in any audio setup.

In summary, the Rogue Audio Sixty Six tube amplifier is a masterful creation that caters to discerning listeners. Its use of high-quality tubes, versatile operating modes, exceptional build quality, and elegant design make it a valuable addition to any high-fidelity audio system. Whether used for casual listening or critical audio evaluation, the Sixty Six consistently delivers an engaging and pleasurable sonic experience.