Canon 300D, 350D, 400D manual Canon 5D and Canon 5D mk, Canon 1D and 1Ds

Page 3

Canon 5D and Canon 5D mk II

1.Install the ExpoDisc and set the camera to Manual Focus mode.

2.Allow the camera to set an automatic exposure using the “P”, “S” or “A” modes or set the correct manual exposure in “M” mode.

3.Aim the camera towards the light illuminating the subject and press the shutter release button.

4.Push the ʻMENUʼ button

5.Scroll down to ʻCustom WBʼ in the menu using the thumb dial, then push the ʻSETʼ button in the center of the thumb dial.

6.Push the ʻSetʼ button again to select the ExpoDisc ʻgray frameʼ just taken. A reminder message will appear if the camera is not in ʻCustom WBʼ mode.

7.Push the ʻMENUʼ button to exit the menu.

8.Push and hold the ʻAF-WBʼ button on top of the camera while rotating the thumb dial to select the ʻcustom WBʼ icon () in the control panel.

9.Remove the ExpoDisc, return the camera to Auto Focus if desired, and start shooting.

Canon 1D and 1Ds

1.Install the ExpoDisc and set the camera to Manual Focus mode.

2.Allow the camera to set an automatic exposure using the “P”, “S” or “A” modes or set the correct manual exposure in “M” mode.

3.Aim the camera in the appropriate direction for the given lighting condition and press the shutter release button. See the ExpoDisc Instruction Manual or Quickstart Instructions for more information on where to aim the camera.

4.Press and hold the “MENU” button while turning thumb dial to select the camera icon, then release “MENU” button.

5.Press and hold the “SELECT” button while turning thumb dial to select “Custom WB”, then release the “SELECT” button.

6.Press and hold the “SELECT” button while turning the thumb dial to select the desired ʻgray frameʼ just taken, then release the “SELECT” button.

7.Press and hold the “SELECT” button while turning the thumb dial to select “OK”, then release “SELECT” button to import the ʻgray frameʼ white balance data.

8.Press and hold the “WB” button while turning the thumb dial to select the custom WB icon in the control panel located below the LCD screen, then release the “WB” button.

9.Remove the ExpoDisc, return camera to Auto Focus if desired, and start shooting.

Copyright, 2010 ExpoImaging, Inc.

“Canon” and the Canon camera models listed are Trademarks of Canon, Inc.

Image 3
Contents Canon Digital Rebel XTi 400D Canon Digital Rebel 300D and Digital Rebel XT 350DCanon 7D/10D/20D/30D/40D/50D/60D Canon Digital Rebel XSi 450DCanon 1D and 1Ds Canon 5D and Canon 5D mkCanon 1D Mark IIn Canon 1D Mark II and 1Ds MarkCanon 1D Mark III and 1Ds Mark
Related manuals
Manual 11 pages 42.81 Kb Manual 13 pages 51.83 Kb Manual 141 pages 1.39 Kb