Canon 400D user manual Accidents, Service

Page 10

5.5Accidents.

The impact resistance of the housing is excellent. However after an accident the alignment of the housing may have been damaged. Therefore in the event of your housing suffering an impact force, e.g. being dropped, it is essential you do not use the housing for diving. Please return the housing immediately for service. Please put a note inside to indicate the nature of the accident, so that the severity can be assessed.

6. Service

To ensure the continued performance of your housing, it should be serviced every year, or after every 200 dives. Please note the terms for servicing the housing posted at our website. A full service will include:

Inspection of all components for wears or damage (report if repair necessary)

Cleaning of all sealing surfaces, and replacement of all O-ring seals.

Hydrostatic pressure test to 10 Bar.

Note: the replacement of damaged components (except replacement O-rings) may require additional cost.

Image 10
Contents Camera Housing Model 400D Canon Specifications 400D Function Controls 400D Pressure release plug Set up Instructions Air LockOpening levers When to maintain the O-ring seal Special note on responsibility for watertight integrityProcedure Mounting the camera in the housingPage Page Use & Care of Housing Pre Dive Function Check Cleaning & StorageAccidents Please keep this document for future reference
Related manuals
Manual 5 pages 17.21 Kb