Adcom GTP-602 manual AC Power Cord, Phono Inputs, 15 RS232 Control DB

Page 9

Use a twin RCA-to-RCA lead to con- nect the CD player’s left and right ‘Audio Outputs’ to this input.

[9] Auxiliary Analog Inputs

Input for any line-level signal source. Use a twin RCA-to-RCA lead to con- nect the CD player’s left and right ‘Audio Outputs’ to this input.

[10] Tape Inputs/Outputs

Connections for analog recording and playback to an audio tape recorder of any type, such as a cassette, reel- reel, DAT, MD or CD-R. Using twin RCA-to-RCA leads, connect to the left and right ‘Audio Output’ of the tape machine to the TAPE IN connec- tors for playback. Connect the left and right ‘Audio Input’ of the tape machine to the TAPE OUT connectors for recording.

[13] 12V DC Trigger

To facilitate remote turn-on and turn-off of other components (power amplifiers, for example), this 3.5mm mini-jack provides a constant signal (12 volts DC) whenever the GTP-602 is fully powered. When the GTP-602 is turned off (via the front panel switch) or placed in standby mode (via the

[16] Power Switch

The rear panel power switch should be turned off if the system will not be in use for an extended period of time. When the power switch is in the off position the GTP-602 is not using any power from the AC wall circuit. This switch must be on for the GTP-602 to operate in the “stand-by” mode.

[17] AC Power Cord

After you have completed all con- nections to the amplifier, plug the AC line cord into a “live” wall socket. Use only the supplied power cord or equivalent.

[11] Phono Inputs

Input for a phono (record) player (analog audio signal) Use a twin RCA- to-RCA lead to connect the phono- player’s left and right ‘audio outputs’ to this input.

[12] IR Input

The IR input allows hook up of an external IR sensor that sends IR infor- mation to the microprocessor in the GTP-602. This feature can be very use- ful if the GTP-602 is placed behind a non transparent door or is used with an after market remote control system.

“power” button on the remote con- trol), the jack has no output.

[14] Main Audio Outputs

Before making any connections, check that the GTP-602 and the power amplifiers it will be connected to are switched off. Connect the RCA-to-RCA leads from the GTP-602 to your exter- nal amplifiers. The three pairs of out- puts all carry the same signal.

[15] RS232 Control (DB 9)

Allows control of the GTP-602 via com- puter or home automation system.

ADCOM GTP-602 Owner’s Manual 9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents GTP-602 About Adcom Table of Contents Outdoor Antenna Grounding Key Features Safety InformationPlacing the GTP-602 Description of Unit GTP-602 Front PanelRDS Tuner Overview Listeneing to a radio station that you have presetGTP-602 Rear Panel 15 RS232 Control Input Power Switch AC Power InputPhono Input IR Input 13 12V DC Trigger Main Audio Outputs Antenna ConnectionsAC Power Cord Phono Inputs15 RS232 Control DB GRC-820 Remote Control Tuner Presets GRC-820 OverviewDVD Player Control 1AE5h Custom CodeA CodeNEC IR Command List for Adcom GTP-602Symptom Servicing TroubleshootingYour Responsibilities WarrantyTone Controls L and R front only GTP-602 SpecificationsFM Tuner General

GTP-602 specifications

The Adcom GTP-602 is a highly regarded audio/video receiver that brings together advanced technology and outstanding performance in a compact package. Ideal for both music and home theater enthusiasts, this receiver incorporates multiple features that enhance audio and video playback while ensuring user-friendly operation.

One of the most notable features of the GTP-602 is its support for a wide range of audio formats. This receiver is equipped with advanced digital signal processing to provide expansive stereo sound and multi-channel surround sound configurations. It supports various formats, offering compatibility with Dolby Digital, DTS, and even advanced formats such as Dolby Pro Logic II, making it suitable for diverse audio content.

The GTP-602 also boasts a comprehensive input selection that enables users to connect various devices seamlessly. It provides multiple analog and digital inputs, including optical and coaxial, allowing users to hook up their CD players, gaming consoles, and digital media players effortlessly. Additionally, the receiver features a phono input for vinyl lovers, showcasing Adcom's commitment to catering to audiophiles.

In terms of video technology, the Adcom GTP-602 is equipped with high-quality video processing capabilities. It supports multiple video formats, including composite, S-Video, and component video, ensuring compatibility with a range of display devices. Furthermore, the GTP-602 delivers impressive picture quality with low distortion and high fidelity.

User-friendliness is another hallmark of the GTP-602. The receiver comes with an intuitive remote control that simplifies operation. It allows users to navigate through various settings, adjust sound modes, and switch between sources with ease. An easy-to-read display provides essential information, enhancing the overall usability of the device.

The build quality of the Adcom GTP-602 is sturdy and reliable, ensuring longevity and durability. This receiver features high-quality components that contribute to its overall performance, making it a favorite among both casual listeners and audio professionals. Overall, the Adcom GTP-602 is a versatile audio/video receiver that combines advanced features with excellent performance, making it an excellent choice for anyone looking to elevate their audio and visual experience.
Top Page Image Contents