2.Press the shutter button fully to shoot.
The shutter sound will play and the image will record. The indicator will blink green while the image is recorded to the memory card.
ÎSee Basic Shooting Functions (p. 6).
See the Advanced Guide: Indicators (p. 22).
See the Advanced Guide: How to Use the IS Mode (p. 35).
ÎSee the Advanced Guide for the various shooting methods available.
Reviewing an Image Right After Shooting
After a shot is taken, the image appears in the LCD monitor for approximately 2 seconds.
You can continue to display images regardless of the review duration setting with the following procedures.
•Keeping the shutter button pressed after a shot.
•Pressing the FUNC./SET or DISP. button while the image is displayed in the LCD monitor.
To stop displaying the image, press the shutter button halfway.
See the Advanced Guide: Review (p. 27).
Î
See Basic Erasing (p. 11).
Basic Shooting Functions
Selecting a Shooting Mode
1.Turn the mode dial to the desired mode ( ).
In the 
, 
and 
modes, press the FUNC./SET button ( ) and use the 
or 
button to select a shooting mode
( 
), then press the FUNC./SET button ( 
).
6