2.Connecting the camera to a computer.
1.Connect the supplied interface cable to the computer's USB port and to the camera's DIGITAL terminal.
Use the toggle on the wrist strap or slip a fingernail under the edge of the camera's DIGITAL terminal cover, lift up and plug the interface cable in all the way.
USB Port
DIGITAL Terminal
Interface Cable | Interface Cable |
| |
2. Slide the camera's mode switch to |
|
(playback) and turn on the |
|
power. |
|
The camera and computer will be able |
|
to communicate. |
|
Always grasp the sides of the connector when disconnecting the interface cable from the camera's DIGITAL terminal.
If the Digital Signature Not Found window appears, click [Yes]. The USB driver will automatically finish installing onto the computer when you attach the camera and open a connection.
Downloading Images to a Computer
27