Canon Digital Camera warranty #9 Finish Hardwired Camera and Testing

Page 9

#9 Finish Hardwired Camera and Testing

Complete wired camera with “three wire” setup, showing servo three wire connector.

To test camera, refresh wire #6 and shutter wire #5 are solder together. Camera will fire flash when these two wires are touched to common wire #4. Camera must be on, and back door must be latched.

“Film” winding will be heard after the first test. Subsequent test will not include winding without film in the camera. A 6 second delay is needed between tests for the flash capacitor to recharge.

Copyright 2003, Hag’s House http://www.hagshouse.com/

All rights reserved.

Credits: Original modifications and knowledge gained from Jesse’s Hunting and Outdoors c/o: Game Trail Cameras & Video Forum.

Image 9
Contents #1 Remove the Screws How To hardwire the Canon Sure Shot OWL PF Date 35mm CameraRemove screw inside camera enclosure #3 Remove the Camera Body from the Camera Cover #4 Modify Wire Route and Attach Wiring Harness #5 Wiring the Camera #6 Reassemble Camera Body and Cover Page #8 Reinstall Screws #9 Finish Hardwired Camera and Testing