current phase angle or the reactance of the loudspeakers which the amplifier is driving. Sometimes, when the amplifier is in use, the LEDs may occasionally flicker during high volume listening, particularly if you are driving low impedances. This flickering is no cause for concern. The LEDs are simply warning you that the amplifier is approaching its maximum power output into the particular loudspeakers you are using. If, however, the Distortion Alert LEDs glow brightly or are illuminated most of the time during playback, you are over driving the amplifier and should turn down your volume control to reduce
the listening level, otherwise it may cause the Thermal Protection to be activated or, in extreme cases, damage your loudspeakers.
WARNING
WHENEVER CONNECTIONS TO OR FROM THE
COMPONENTS ARE OFF.
Right Front
Center
Left Front
Right Back | Left Surround |
Right Surround | Left Back |