Madrigal Imaging N33, power amplifier manual Important Safety Instructions

Page 3

Important Safety Instructions

Please read all instructions and precautions carefully and completely before operating your Mark Levinson® power amplifier.

1.ALWAYS disconnect your entire system from the AC mains before connecting or disconnecting any cables, or when cleaning any component.

2.This product must be terminated with a three-conductor AC mains power cord which includes an earth ground connection. To prevent shock hazard, all three connections must ALWAYS be used.

3.AC extension cords are not recommended for use with this product.

4.NEVER use flammable or combustible chemicals for cleaning audio components.

5.NEVER operate this product with any covers removed.

6.NEVER wet the inside of this product with any liquid.

7.NEVER pour or spill liquids directly onto this unit.

8.NEVER block air flow through ventilation slots or heatsinks.

9.NEVER bypass any fuse.

10.NEVER replace any fuse with a value or type other than those specified.

11.NEVER attempt to repair this product. If a problem occurs, contact your Mark Levinson® re- tailer.

12.NEVER expose this product to extremely high or low temperatures.

13.NEVER operate this product in an explosive atmosphere.

14.ALWAYS keep electrical equipment out of the reach of children.

15.ALWAYS unplug sensitive electronic equipment during lightning storms.

3

Image 3
Contents Operating Manual Page Important Safety Instructions Page Table of Contents Unpacking the Nº33 To safely unpack the Nº33 amplifier Machined aluminum spiked feet Placement Considerations Spiking the Amplifier Operating Voltage 0 V 1 2 0 V 2 0 0 V 2 1 0 V 2 2 0 V 2 3 0 V 2 4 0 Special Design Features Page Page Front Panel Rear Panel Pin 1 Signal ground Code Fault Condition Speaker Binding Posts Page Care & Maintenance Canadian Warranty Obtaining Service Typically 210 W ± 5% in standby SpecificationsDimensions Nº33 Page Madrigal Audio Laboratories