Canon VIV-PG-50D instruction manual Inserting the DC Coupler

Page 14

Inserting the DC Coupler

To connect to a household power outlet use the AC adapter kit ACK-E2 (sold separately).

1.Connect the DC coupler to the AC adapter, and then connect the power cord to a power outlet.

2.Load the DC coupler to the left

side of the battery compartment, (see figure 10), and pass the cord through the cord mount (see figure 10).

3.Insert the DC coupler all the way in.

4.Check that the cord passes properly through the cord mount and close the cover until it clicks into place.

-13-

Image 14 Canon VIV-PG-50D instruction manual Inserting the DC Coupler
Contents Deluxe Power Grip for Canon 40D/50D Limited One Year Warranty What to do When Service is Needed Introduction Quick Look at Your Device Attaching Your Power Grip to Your Camera See figure Attaching Your Power Grip to Your Camera Inserting Battery Packs Into Your Power Grip Inserting Battery Packs Into Your Power Grip Inserting Battery Packs Into Your Power Grip Inserting AA Batteries Inserting AA Batteries Inserting the DC Coupler Inserting the DC Coupler Using the Battery Grip Battery Life EOS 20DSpecifications