Camera Preparation and Installation

CAMERA PREPARATION AND INSTALLATION

1.Important Note: prior to installing the camera in the housing, remove the camera strap, “D” Clips and/or any object that might obstruct installation or get in the way of that attach the strap should be removed or tucked away

3.Make sure the ON / OFF (key # 32) is in the ON position and that the lens lock lever is in the proper position

4.Remove the saddle from the housing and carefully place the camera on it and ensure the camera is properly installed and aligned as follows:

a)The camera is properly aligned and secured against rotation or movement.

b)Align the Tripod Socket of the camera with the mounting screw. Tighten the

mounting screw securely while ensuring that the camera position is not altered. set arresting block as per drawing at right.

c)Align the ON/OFF lever to the ON position

d)Slide the quick release tray back into place as per drawing at right.

CLOSING OF THE HOUSING

Once the camera is secure on the saddle inside the front half of the housing, simply:

1.Slide the housing’s hot shoe connector onto the hot shoe base of the camera, as seen in photo at right.

Before closing the housing always ensure that:

1.The main O-ring on the front half of the housing is clean,lubricated and properly seated for a positive seal.

2.The sealing surface on the rear half of the housing is clean and free from any scratches or physical damage.

3.All cords or wires are tucked in so that they do not interfere with the closing of the housing.

4.The ON/OFF lever is in the same position on both the camera and the housing .

To close the housing simply:

i.Join the front and rear halves of the housing using the two dowel pins at the bottom of the housing as a guide.

ii.Hold the housing with both hands and look around the sealing surface to ensure that the O-ring remained properly seated and that no cords, wires or “D-rings” are caught between the edges.

iii.Close the two sides latches simultaneously. Reverse the process to open housing

CAUTION: if you feel any resistance as you attempt to close the latches, do not force the closure. Check for an obstruction and try again.

iv.Verify that the safety locking mechanisms of the latches are properly engaged to avoid any accidental opening.

page 7

20062 specifications

The Canon 20062 is a versatile product that reflects Canon's commitment to quality and innovation. As part of the esteemed Canon EOS line, this camera is designed for both amateur photographers and seasoned professionals seeking to capture stunning images with ease.

One of the most notable features of the Canon 20062 is its high-resolution sensor, which offers exceptional image quality and detail. The CMOS sensor works in conjunction with a DIGIC image processor to deliver vibrant colors, impressive dynamic range, and low noise levels, even in challenging lighting conditions. This makes it an ideal choice for shooting everything from landscapes to portraits.

The camera also boasts an advanced autofocus system that enhances its usability for various photography styles. With a generous number of autofocus points, many of which are cross-type, the Canon 20062 ensures quick and accurate focusing. This feature is particularly beneficial when capturing fast-moving subjects, allowing photographers to achieve sharp shots with minimal effort.

Another standout characteristic of the Canon 20062 is its user-friendly interface. The camera is equipped with a clear and intuitive touchscreen display, which makes navigating settings and reviewing images straightforward. Additionally, customizable controls enable users to tailor the camera's functionality to their specific needs, enhancing the overall shooting experience.

For videographers, the Canon 20062 does not disappoint. The camera supports full HD video recording at various frame rates, allowing users to create smooth, high-quality footage. With built-in microphone input and headphone output, it offers the flexibility needed for serious video production.

In terms of connectivity, the Canon 20062 includes built-in Wi-Fi and NFC capabilities, making it easy to transfer images to devices or share them on social media. This seamless connectivity, combined with compatibility with Canon’s mobile app, allows for remote shooting and easy management of photos.

Durability is yet another highlight of the Canon 20062. Built with a rugged body, it features weather-sealing that helps protect against dust and moisture, making it suitable for outdoor adventures.

In summary, the Canon 20062 stands out due to its excellent image quality, advanced autofocus, user-friendly design, and robust connectivity options. These features collectively make it a compelling choice for anyone looking to elevate their photography or videography game.