Sony XC-E Series Specifications, XC-ES50 XC-ES50L XC-ES51 XC-ES30 XC-EI50 XC-EI30 XC-EU50

XC-E Series Specifications

	XC-ES50	XC-ES50L	XC-ES51		XC-ES30	XC-EI50	XC-EI30	XC-EU50
Image device		1/2 type IT CCD			1/3 type IT CCD	1/2 type IT CCD	1/3 type IT CCD	1/2 type IT CCD
Effective picture elements					768 (H) x 494 (V)
Signal system					EIA (standard)
Horizontal frequency					15.734 kHz
Vertical frequency					59.94 Hz
Cell size (µm)		8.4 x 9.8			6.35 x 7.4	8.4 x 9.8	6.35 x 7.4	8.4 x 9.8
Lens mount					C mount
Flange back					17.526 mm
Sync system				Internal/External (auto)
External sync system					HD/VD (2 to 5 Vp-p)
External sync frequency				± 1 %
Jitter Less than					± 50 nsec
Scanning system					2:1 Interlaced
Video output			1.0 Vp-p, negative, 75 Ω unbalanced
Horizontal resolution					570 TV lines
Sensitivity
(Gamma ON, MIN GAIN,	400 lx F5.6	400 lx F4	400 lx F8		400 lx F4	400 lx F11	400 lx F8	–
No IR cut filter)
Minimum illumination*	0.3 lx	3.0 lx	0.2 lx		0.3 lx	0.1 lx	0.2 lx	–
S/N ratio					60 dB
Gain				AGC/Manual selectable
Gamma					ON/OFF selectable
Normal shutter					1/100 to 1/10,000 s
External trigger shutter**					1/4 to 1/10,000 s
Power requirements				DC 12 V (+9 to +16 V)
Power consumtion		1.6 W			1.4 W	1.6 W	1.4 W	1.6 W
Dimension (W) x (H) x (D)	29 x 29 x 30 mm	29 x 42.5 x 43.8 mm				29 x 29 x 30 mm
Mass	50 g (2 oz)	110 g (4 oz)				50 g (2 oz)
Operating temperature				-5 to +45 °C (23 to 104 °F)
Operating humidity					20 to 80 %
Storage temperature			-30 to +60 °C (-22 to +140 °F)
Storage humidity					20 to 95 %
Vibration resistance					10 G (20 to 200 Hz)
Shock resistance					70 G
MTBF					126,000 hrs.
Regulatory compliance		UL1492, FCC Class B Digital Device, CE (EN61326/97 + A1/98), AS4251.1 + AS4252.2
Supplied accessories			Lens mount cap (1), Operating instructions (1)
* (F1.4, AGC ON, without IR cut filter) ** Using Dip switch on the rear panel or Using trigger pulse width
	XC-ES50CE	XC-ES50LCE	XC-ES51CE		XC-ES30CE	XC-EI50CE	XC-EI30CE	XC-EU50CE
Image device		1/2 type IT CCD			1/3 type IT CCD	1/2 type IT CCD	1/3 type IT CCD	1/2 type IT CCD
Effective picture elements					752 (H) x 582 (V)
Signal system					CCIR (standard)
Horizontal frequency					15.625 kHz
Vertical frequency					50 Hz
Cell size (µm)		8.6 x 8.3			6.5 x 6.25	8.6 x 8.3	6.5 x 6.25	8.6 x 8.3
Lens mount					C mount
Flange back					17.526 mm
Sync system				Internal/External (auto)
External sync system					HD/VD (2 to 5 Vp-p)
External sync frequency				± 1 %
Jitter Less than					± 50 nsec
Scanning system					2:1 Interlaced
Video output			1.0 Vp-p, negative, 75 Ω unbalanced
Horizontal resolution					560 TV lines
Sensitivity
(Gamma ON, MIN GAIN,	400 lx F5.6	400 lx F4	400 lx F8		400 lx F4	400 lx F11	400 lx F8	–
No IR cut filter)
Minimum illumination*	0.3 lx	3.0 lx	0.2 lx		0.3 lx	0.1 lx	0.2 lx	–
S/N ratio					60 dB
Gain				AGC/Manual selectable
Gamma					ON/OFF selectable
Normal shutter					1/120 to 1/10,000 s
External trigger shutter**					1/4 to 1/8,000 s
Power requirements				DC 12 V (+9 to +16 V)
Power consumtion		1.6 W			1.4 W	1.6 W	1.4 W	1.6 W
Dimension (W) x (H) x (D)	29 x 29 x 30 mm	29 x 42.5 x 43.8 mm				29 x 29 x 30 mm
Mass	50 g (2 oz)	110 g (4 oz)				50 g (2 oz)
Operating temperature				-5 to +45 °C (23 to 104 °F)
Operating humidity					20 to 80 %
Storage temperature			-30 to +60 °C (-22 to +140 °F)
Storage humidity					20 to 95 %
Vibration resistance					10 G (20 to 200 Hz)
Shock resistance					70 G
MTBF					126,000 hrs.
Regulatory compliance		UL1492, FCC Class B Digital Device, CE (EN61326/97 + A1/98), AS4251.1 + AS4252.2
Supplied accessories			Lens mount cap (1), Operating instructions (1)

* (F1.4, AGC ON, without IR cut filter) ** Using Dip switch on the rear panel or Using trigger pulse width