Sony XC-555/555P technical manual Setting the RS-232C Switches

Page 11

Precautions to be Observed When Using RS-232C Commands

When the unit is shipped from the factory, the RS- 232C input item is set to [OFF]. To send RS-232C commands to the camera, flip the DIP-switch to [ON]. For details, refer to “Setting the RS-232C switch” in the next column.

Changing the setting of the RS-232C switch falls under the heading of dismantling the camera, and is outside the scope of the warranty. To change the setting, request assistance from the dealer from whom you purchased your camera.

When toggling the RS-232C Input/Output function on and off, and when connecting the camera and a host computer, be sure perform any operations only after shutting off the power of both the camera and the host computer.

When controlling the camera using the RS-232C feature, the DIP switches on the camera and the R/B adjustment volume settings are disabled.

Use only the Sony DC-700/700CE power adaptors. The DC-77RR/77RRCE, DC-777/777P, CMA-D2/ D2CE, and CMA-D2MD adaptors cannot be used.

Keep in mind the following with respect to the RS-

232C TXD and RXD connectors:

Do not allow the voltage applied to exceed a margin of +/– 10V with the RXD (pin 11 of the 12 multi-connector).

The signal level output from the TXD (pin 10 of the 12 multi-connector) is within +/– 5.4V (TYP). Do not apply external voltage.

RS-232C Command List

Setting the RS-232C Switches

Warning

Be aware that changing the setting of the RS-232C switches falls under the heading of dismantling the camera, and anything beyond this change of settings, carried out by a Sony-authorized repair department (company), is outside the scope of the warranty.

Notes

Be sure to make these changes only after turning off the power to the camera.

In order to keep dust from adhering to the light- receptor surface of the CCD, attach the lens mount cap, etc., beforehand.

1 Detach the 12-pin cable from the camera.

2 Using a Philips screwdriver, remove the Philips screws (7) from the camera.

At this point, the head block may fall out because of elasticity of wires attached to the CCD head block. Take care to avoid this.

 

 

1

9

 

 

 

2

10

8

TXD

RXD

3

7

 

11

12

 

 

46

5

3 Push the rear panel to which the 12-pin connector is attached about 3 mm into the frame of the camera. The hidden RS-232C DIP switches will become visible in the little window provided to carry out DIP switch operations.

4 Switch both of the last two switches on the left end of the row to the down position.

11

Image 11
Contents CCD Color Video Camera Module Table of Contents Main Features Connection Diagram Location of Parts and Operation Dip switches for setting functionsTo Adjust the white balance Mode SettingPin assignment of the DC IN/SYNC/VIDEO connector Usable Lenses InstallationTo adjust the shutter speed AGC Auto Gain Control ON/OFFTo attach a lens To install the camera on a tripodHD/VD, VS ConnectionsGenlockFunctions That can be Controlled via the RS- 232C Interface RS-232C Command ListPrecautions to be Observed When Using RS-232C Commands Setting the RS-232C SwitchesConnections Communication SpecificationsSequence from Power up to Beginning/End of Communication Shutter Settings Camera Function Setting CommandsSetting Gain White Balance Settings System Settings Video Process SettingRead Request Rmem Camera Setup Readout from a ListExamples Structure of the Memory Banks RS-232C Mode and the Memory BanksFunctions Available with Memory Load/Save Memory Bank to be Activated When Power is Turned onWhen the RS-232C switches are set to When the RS-232C switches are set to onXC-555 Ntsc Shutter speed Shutter Speed and the Settings Command1DB XC-555P PAL Shutter speed 039.6 Pickup device Accessories not supplied DimensionsXC-555P Spectral Sensitivity Characteristics Typical ValueXC-555 Appendix

XC-555/555P specifications

The Sony XC-555 and XC-555P are advanced industrial cameras that have garnered attention for their high-performance capabilities in various applications, including machine vision, medical imaging, and scientific research. Known for their compact design and robust features, these cameras are built to deliver exceptional image quality and reliability.

At the heart of the XC-555 series lies a high-resolution CCD sensor that ensures clear and detailed images. The camera boasts a resolution of 1380 x 1024 pixels, allowing users to capture fine details in their imaging tasks. This high pixel count is particularly advantageous in industrial applications where precision is critical. The camera is capable of 30 frames per second, making it suitable for dynamic and fast-paced environments.

One of the standout features of the XC-555 is its versatile output options. It supports both analog and digital video output, providing flexibility for integration with various systems. The camera's analog output (CCIR or EIA formats) ensures compatibility with a wide range of devices, while the digital output caters to modern interfaces, including USB and FireWire connections. This dual-output capability makes the XC-555 an ideal choice for users needing to interface with different equipment.

The camera employs advanced signal processing technologies to enhance image quality. It features adjustable gain and shutter speeds, allowing users to fine-tune settings for optimal performance in varying lighting conditions. This adaptability is crucial for industrial environments where lighting can often be inconsistent.

Additionally, the XC-555 series incorporates a robust design, making it resistant to harsh operating conditions. Its compact form factor allows for easy integration into smaller spaces, making it a suitable choice for automation systems. The camera operates efficiently over a wide temperature range, ensuring reliable performance in diverse environments.

Another notable characteristic of the XC-555 is its user-friendly interface. The camera is designed for easy setup and operation, with intuitive controls that simplify the configuration process. Users can easily adjust parameters and settings to match their specific requirements, which enhances productivity and efficiency.

In conclusion, the Sony XC-555 and XC-555P cameras are distinguished by their high-resolution imaging, flexible output options, and advanced processing technologies. These features, combined with their robust design and ease of use, make them an excellent choice for a wide range of industrial and scientific applications. Whether for quality control, automation, or research, the XC-555 series stands out for its reliability and performance in capturing high-quality images.