Madrigal Imaging Five Channel Amplifier manual Operating Voltage, Five channel amplifier

Page 7

note the serial number

amplifier bottom-panel label

Operating Voltage

The Proceed amplifier is factory-set for 100V, 120V, 220V, or 240V AC mains opera- tion at either 50 or 60 Hz, according to the country for which the unit was manu- factured. (230V in European Union countries, in compliance with CE regulations.) Make sure that the label on the rear panel of the amplifier indicates the correct AC operating voltage for your location. The operating voltage cannot be changed by the user, and any attempt to do so will void the warranty.

If the voltage indicated does not match the service in your area, see your Pro- ceed dealer.

While you are checking the voltage, it would probably be a good idea to make a record of the serial number for your amplifier. This can be found on the label found on the bottom of the amplifier.

WARNING: BEFORE ATTEMPTING TO OPERATE THIS

DEVICE, REFER TO OWNER'S MANUAL FOR PROPER

OPERATING INSTRUCTIONS AND SAFETY PRECAUTIONS.

HAZARDOUS VOLTAGE AVAILABLE INSIDE; DISCONNECT

AC ~ MAINS CABLE BEFORE OPENING UNIT.

PR O C E E DR

five channel amplifier

S/N

MADRIGAL AUDIO LABORATORIES, INC.

designed and manufactured in USA

No User Serviceable Components Inside. For service, contact Madrigal Audio Laboratories or an Authorized Dealer. Any modifications to this equipment will void all warranties.

Manufactured under license from Lucasfilm Ltd. Additionally licensed under the following patents: U.S. number 5,043,970; 5,189,703; and 5,222,059. Foreign patents pending. Lucasfilm THX Audio, Lucasfilm, and Home THX Cinema are registered trademarks of Lucasfilm Ltd.

7

Image 7
Contents Five Channel Amplifier PR O C EPage ImportantSafetyInstructions Page Table of Contents Unpacking and Placement Five channel amplifier Operating VoltageQuick Start Slowly Raise the Volume on Your Preamplifier Special Design Features Home THX Audio System certification Front Panel Indicator Lights Rear Panel Remote TURN-ON TRIGGER’ Jacks Pin 1 Signal ground Speaker Outputs & Binding Posts Bridged Operation Disconnect Your Amplifier from Everything Power UP Your Amplifier Bridging Output Adapter Repeat AS Needed for Other Channels Power UP Your Amplifier Biamplification Care & Maintenance Canadian Warranty Obtaining Service Madrigal Audio Laboratories, Inc Specifications16.87 DimensionsRack Mounting PR O C E E DR

Five Channel Amplifier specifications

Madrigal Imaging has carved a niche in the audiophile community with its high-performance audio equipment, notably the Five Channel Amplifier. This model is designed to deliver exceptional sound quality that caters to both home theater enthusiasts and dedicated music lovers.

One of the main features of the Madrigal Imaging Five Channel Amplifier is its ability to deliver robust power across all five channels. With an output power rating that typically peaks at 200 watts per channel, it ensures that even the most demanding speakers can be driven effortlessly. This means crystal-clear sound reproduction at various volume levels, making it suitable for both explosive action sequences in movies and subtle details in music.

The amplifier also employs advanced Class A/B operation, which combines the benefits of both Class A and Class B designs to provide optimal efficiency without sacrificing audio fidelity. This technology minimizes crossover distortion, ensuring that sound remains clean and precise, even at high volumes.

Another significant characteristic of this amplifier is its high-current output capability, which allows it to manage dynamic loads effectively. This feature is critical for maintaining audio clarity during complex musical passages, where rapid changes in volume and dynamics occur.

Madrigal Imaging has also integrated proprietary thermal management technologies into the Five Channel Amplifier. This ensures that the device operates within safe temperature limits, even during prolonged use, thereby extending its lifespan and maintaining performance integrity.

Furthermore, the amplifier includes versatile connectivity options, with multiple RCA and balanced XLR inputs, allowing for seamless integration into various audio systems. This flexibility means that users can easily connect the amplifier to their existing audio sources, ranging from CD players to home theater systems.

Lastly, the build quality of the Madrigal Imaging Five Channel Amplifier is exceptional, featuring a robust chassis designed to minimize vibration and enhance durability. This attention to construction not only contributes to the unit's longevity but also aids in preserving sound quality by reducing interference and noise.

In conclusion, the Madrigal Imaging Five Channel Amplifier stands out in the crowded high-end audio market. With its powerful output, advanced technologies, and meticulous construction, it promises an outstanding listening experience for both home theater systems and music playback.