Kodak TI-2037 manual Darkroom Recommendations, Support, Storage and Handling, Exposure

Page 1

TECHNICAL DATA / PRINTED CIRCUIT BOARD FILM

KODAK PRECISION LINE

Contact Film UCA7

—High Complexity PCB Starts With the Right Phototools—

 

May 2005 • TI-2037

 

 

 

 

 

 

 

 

• Designed for making contact phototools from

DARKROOM RECOMMENDATIONS

photoplotter output or other line work.

This film can be safely handled for up to a total of

 

• Negative working, slow speed, ultraviolet sensitivity

60 minutes, before or after exposure, in up to 40 footcandles

• Expose with high intensity metal halide or pulsed-xenon

(430 lux) of roomlight illumination substantially free of

ultraviolet (UV) energy. Such illumination is supplied by

source

yellow fluorescent lamps (warm white preferred) and white

• Use in white fluorescent illumination covered with

fluorescent lamps covered by UV-absorbing or modified by

ultraviolet-absorbing material or in yellow fluorescent

UV-absorbing plastic diffusers. Other roomlight sources

illumination

contain varying amounts of UV energy, and their roomlight

 

• Very dimensionally stable ESTAR Thick Base with

tolerances for this film should be tested under the specific

antistatic properties under a wide range of humidity

conditions of use.

conditions, both before and after processing.

 

 

 

 

 

•Excellent scratch and abrasion resistant overcoat.

•Produces high image density at line-for-line exposures with minimum pinholes.

•Sufficient matte level on both sides to minimize Newton's rings and to provide rapid drawdown in vacuum printing frames.

•Can also be processed in a wide selection of machine developers including lith and rapid-access, along with KODAK ULTRALINE Developer and Replenisher.

SUPPORT

Dimensionally stable support.

7-mil (0.18 mm)

ESTAR Thick Base

 

 

STORAGE AND HANDLING

Keep unexposed film and processed film in a cool, dry place. Process film as soon as possible after exposure.

EXPOSURE

Expose with a multi-level high-intensity metal-halide exposure source. Optimum exposure should be determined by means of a trial exposure series, following the equipment manufacturer's recommended procedures. Use a trial exposure time of 5 to 20 seconds at an exposure distance of 127 to 152 cm (36 to 60 inches). Contact your Kodak representative for more information.

Note: Exposures for optimum line width reproduction are critical when using a broad light source, and when making base-to-emulsion exposures. Any light falloff from the center to the edge of the exposing source may affect overall reproduction quality and introduce problems with accurate line-width reproductions.

Precautionary: Contact the manufacturer of high intensity ultraviolet lamps for safety information pertaining to ultraviolet radiation and ventilation requirements due to ozone generation.

©Eastman Kodak Company, 2005

Page 1 Page 2
Image 1
Page 1 Page 2
Contents Support Darkroom RecommendationsStorage and Handling ExposureProcessing ReciprocityRecommended Starting Points Replenishment RatesCharacteristic Curve Dimensional StabilityCurves More Information Kodak Precision Line Contact Film UCA7

TI-2037 specifications

The Kodak TI-2037 is a remarkable entry in the world of imaging technology, designed to cater to both professional and amateur photographers looking for high-quality results. With its robust set of features and advanced technologies, this camera stands out in a competitive landscape.

At the heart of the Kodak TI-2037 is a powerful imaging sensor, which delivers stunning resolution and exceptional image clarity. The sensor is paired with an advanced image processing engine that enhances image quality, reduces noise, and ensures vibrant colors across a range of lighting conditions. This makes the Kodak TI-2037 an excellent choice for shooting in various environments, from bright outdoor sunlight to dimly lit interiors.

One of the defining characteristics of the TI-2037 is its user-friendly interface, making it accessible to photographers of all skill levels. The camera features an intuitive layout with easily navigable menus, allowing users to quickly adjust settings like exposure, ISO, and white balance. This ensures that even those new to photography can capture impressive images without getting lost in complicated settings.

In terms of connectivity, the Kodak TI-2037 incorporates built-in Wi-Fi and Bluetooth capabilities. This allows for seamless sharing of photos and videos directly from the camera to smartphones and social media platforms. Additionally, the camera supports remote shooting via a dedicated mobile app, providing versatility for creative shots and group photos.

The Kodak TI-2037 also excels in video capabilities, offering high-definition recording with options for frame rates that cater to various filmmaking styles. Whether capturing smooth slow-motion footage or high-speed action, the TI-2037 adapts effortlessly to the user's needs.

Another remarkable feature of the TI-2037 is its battery life, with the ability to capture hundreds of shots on a single charge. This ensures that photographers can shoot for extended periods without worrying about running out of power, making it ideal for events, travel, and outdoor adventures.

Durability is also a key characteristic of the Kodak TI-2037. The design includes weather-sealing that protects it against dust and moisture, allowing it to perform reliably in challenging conditions. This rugged build quality appeals to those who often find themselves in diverse shooting environments.

In summary, the Kodak TI-2037 combines advanced imaging technology with user-friendly design elements, making it a standout choice for anyone looking to elevate their photography experience. With features like high-resolution imaging, seamless connectivity, and robust video capabilities, it represents a blend of innovation and practicality that meets the needs of today’s photographers. Whether for casual hobbyists or serious enthusiasts, the TI-2037 undoubtedly leaves a lasting impression in the realm of digital photography.
Top Page Image Contents