Shure UR1M manual Replacement Parts and Accessories, Certification, Licensing Information

Page 2

Overall Dimensions

 

 

UR1M Transmitter Audio Input:

49 mm L x 60 mm W x 17 mm D (1.9 x 2.38 x 0.66 in.)

Connector:

4-Pin male mini connector (TA4M)

Net Weight

 

 

 

 

 

3-Pin female mini connector (LEMO XRB.00.303)

62 g (2.2 oz.) without batteries

 

Input Configuration:

Unbalanced, active

Wiring

 

 

 

 

 

 

TA4F Connector

 

 

Maximum Input Level:

+5 dBu (sensitivity 0 dB)

Microphone Element

TA4F

TA4M

(1 kHz, 1% THD)

+15 dBu (sensitivity –10 dB)

Connector

Connector

 

 

 

TA4M Connector Pin

Pin 1: Ground

 

 

UR1M MIC JACK BOARD

 

 

Assignments:

Pin 2: +5 VDC bias

 

 

 

 

 

 

Pin 3: Audio, 200 kΩ

 

 

 

 

 

 

 

 

Pin 4: Tied through active load (on main board)

 

 

Active Load

 

to ground.

 

 

 

(On instrument adapter cable, Pin 4 floats)

 

 

Audio

 

 

 

LEMO Connector Pin

Pin 1: Ground

 

 

Ground

 

 

Assignments:

Pin 2: +5 VDC bias

NOTE: LAVALIER MIC TIES PINS 3 AND 4 TOGETHER—GUITAR CABLE DOES NOT.

 

Pin 3: Audio

 

 

 

 

LEMO Connector

 

 

 

(8.2 kΩ between pin 2 and 3, internal to UR1M)

Microphone Element

UR1M LEMO BOARD

 

Audio

Ground

Connector

Connector

UR1M Transmitter RF Output:

 

 

 

 

 

Connector:

 

SMA

 

 

 

Actual Impedance:

 

50 Ω

 

 

 

Pin Assignments:

 

Shell = Ground

 

 

Center = Signal

REPLACEMENT PARTS AND ACCESSORIES

Furnished Accessories

Antenna, 470-530 MHz

UA700

Antenna, 518-578 MHz

UA710

Antenna, 578-698 MHz

UA720

Antenna, 740-865 MHz

UA730

Antenna, 944-952 MHz

UA740

Threaded Locking Adaptor (UR1M with TA4F)

WA340

Optional Accessories

 

Bodypack Pouch (Black)

WA581B

Bodypack Pouch (White)

WA581W

3-Pin mini Lemo conversion kit

WA335

Note

To fully interact with the Receiver, it is recommended to upgrade the UR4 firmware to 1.50 or higher and Shure Wireless Workbench to 5.0

Certification:

UR1M: Type Accepted under FCC Parts 74 (FCC ID: DD4UR1MA, DD4UR1MB, DD4UR1MC, DD4UR1MD, DD4UR1MF, DD4UR1MG, DD4UR1MRA,

DD4UR1MRB, DD4UR1MRC, DD4UR1MRG). Certified by IC in Canada under RSS-123 and RSS-102 (IC: 616A-UR1MA, 616A-UR1MB, 616A-UR1MC, 616A-UR1MD, 616A-UR1MRA, 616A-UR1MRB, 616A-UR1MRC).

The “EU Declaration of Conformity” can be obtained from Shure Inc. or any of its European representatives. For contact information please visit www.shure.com

LICENSING INFORMATION:

Licensing: A ministerial license to operate this equipment may be required in certain areas. Consult your national authority for possible requirements.

Changes or modifications not expressly approved by Shure Incorporated could void your authority to operate the equipment. Licensing of Shure wireless micro- phone equipment is the user’s responsibility, and licensability depends on the user’s classification and application, and on the selected frequency. Shure strongly urges the user to contact the appropriate telecommunications authority concerning proper licensing, and before choosing and ordering frequencies.

Information to User:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Operation of this device is subject to the following two conditions:

(1)this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired

operation of the device.

Note: EMC conformance testing is based on the use of supplied and recommended cable types. The use of other cable types may degrade EMC performance.

SHURE Incorporated http://www.shure.com United States, Canada, Latin America, Caribbean: 5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.

Phone: 847-600-2000 U.S. Fax: 847-600-1212 Int’l Fax: 847-600-6446 Europe, Middle East, Africa:

Shure Europe GmbH, Phone: 49-7131-72140 Fax: 49-7131-721414 Asia, Pacific:

Shure Asia Limited, Phone: 852-2893-4290 Fax: 852-2893-4055

2

Image 2
Contents Band Range FeaturesFrequency Range 27A12268 Rev Shure IncorporatedCertification Replacement Parts and AccessoriesOptional Accessories Licensing Information

UR1M specifications

The Shure UR1M is a compact and versatile bodypack transmitter that serves as a critical component in Shure's renowned wireless microphone systems. Designed with professionals in mind, the UR1M is particularly favored in the fields of live performance, broadcasting, and theatre, where reliability and audio fidelity are paramount.

One of the standout features of the UR1M is its ultra-compact size, which makes it easy to conceal on a performer or presenter. Weighing only 100 grams, it can be effortlessly worn on belts, in pockets, or clipped discreetly to clothing. Despite its small form factor, the UR1M does not compromise on performance, boasting high-quality audio transmission that rivals larger, conventional transmitters.

The UR1M operates on the cutting-edge Shure RF technology, which ensures a robust signal with minimal interference, even in challenging environments. It features a frequency range of 470 to 1000 MHz, allowing it to adapt to various operating conditions and national regulations. This flexibility is essential for users working across different venues and locations.

Equipped with Shure's patented Diversity technology, the UR1M provides improved operational reliability through the use of two receiver antennas, which help to mitigate dropouts and maintain consistent audio quality. Additionally, the smart switchable output allows for easy integration with other equipment, providing optimal versatility for different setups.

The UR1M also includes adjustable gain settings, which enable users to fine-tune their audio level preferences. An intuitive LCD display provides real-time information about battery life, signal strength, and set frequency, giving users the ability to monitor their system status at a glance.

Battery life is another critical aspect of the UR1M, as it operates on two AA batteries, allowing for extended use without interruptions. For those looking for sustainability, an optional rechargeable battery pack can also be utilized.

In summary, the Shure UR1M stands out in the wireless audio arena with its compact design, robust RF performance, and ease of use. Its combination of advanced technology and practical features makes it an ideal choice for anyone seeking a reliable wireless microphone solution. Whether for stage performances, presentations, or broadcasting, the UR1M consistently delivers the quality and performance that Shure is known for.