Sony HVR-Z1, HDR-FX1 instruction manual Placing the Camcorder Into the Housing, Closing the Housing

Page 9

PREPARING CAMCORDER & HOUSING

PLACING THE CAMCORDER INTO THE HOUSING

By now the camcorder is set, installed to the saddle and ready to be placed inside the housing.

1.Line up the camcorder and saddle with the docking tray found inside the housing.

2.Begin to insert the camcorder by placing the front of the saddle over the docking tray. This will allow you to better locate the rails on the docking tray.

3.Slide the camcorder all the way until the saddle connector makes contact with the docking tray connector.

4.Rotate the handle on the saddle to secure the camcorder into the housing. This will also guaranty a perfect connection for the saddle connector.

5.Set the power switch on the camcorder to CAMERA. NOTE: It is essential for the camcorder to be turned ON in order for the housing electronic features to work properly.

CLOSING THE HOUSING

1.While the housing is open, inspect the two o-rings and the sealing surface for dirt and debris. If necessary, clean them with a lint free tissue. Make sure that the two o-rings and the sealing surface are clean. Then apply a small amount of lubricant (supplied) to the o-rings.

NOTE: If you have to change your o-rings, make sure you are using the o-rings provided with the package. Using different o-rings than those in the o-ring kit may cause the housing to leak and result in damage.

2.Make sure that the LANC cable doesn't block the sealing surface. If that cable gets pinched, the system might be intermittent or not functioning at all. Close the rear door until the latches begin to engage.

3.Make sure the o-rings are well placed before locking the latch. Turn the latch clockwise until a positive click is felt.

8

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Sony HDR-FX1 & HVR-Z1 Features Introduction & FeaturesPower On/Off Record/Standby Variable speed Zoom T/W Phenom FXZ1Table of Contents Ring kit with container of silicone grease Unpacking Your HousingHousing Features &CONTROLS Iris Gain Shutter Opening the Housing Preparing Camcorder & HousingUse the handle to pull the saddle completely out Housing Setting the CamcorderInstalling the Saddle Setting the Saddle AudioConnecting the Saddle ZoomClosing the Housing Placing the Camcorder Into the HousingIris knob mechanism Allen Key supplied Menu knob mechanism Adjusting the Iris and Menu KnobsViewfinder Eyepiece Replacing the Bayonet LensWater Entry Installing AccessoriesHousing & Camcorder Operation Focusing ZoomingZoom Wheel Page Review EffectsIndex Marker BacklitMenu Iris Adjustment KnobND Filter Knob GainServicing O-RINGS MaintenancePhenom SpecificationsOptional Accessories General Shooting Tips Conditions Warranty
Related manuals
Manual 2 pages 39.25 Kb

HVR-Z1, HDR-FX1 specifications

The Sony HDR-FX1 is a pioneering high-definition camcorder that garnered significant attention upon its release in 2004. It is especially noted for being one of the first camcorders to offer true 1080i high-definition recording capabilities, catering to both amateur filmmakers and professionals alike. Equipped with a 1/3-inch CMOS sensor, the FX1 captures stunningly detailed images, ensuring that each frame is rich in color and clarity.

One of the notable features of the HDR-FX1 is its advanced imaging technology, including the use of Sony’s ClearVid sensor and a 3D Color Filter. This combination enhances the camera's ability to render vibrant colors and fine details, providing beautiful images even in challenging lighting conditions. The FX1 supports a 16:9 aspect ratio, allowing users to create cinematic productions with ease.

The camcorder also features a Carl Zeiss Vario-Sonnar T lens with a focal length of 5.4 to 64.8 mm (35mm equivalent: 40 to 480 mm), which provides excellent optical performance and versatility. The lens has a remarkable maximum aperture of f/1.6, allowing for great low-light performance and beautiful bokeh effects. The optical image stabilization system further enhances the shooting experience by minimizing the effects of camera shake, making it easier to capture steady footage.

Sony's HDR-FX1 adopts the HDV format for high-definition video recording, utilizing a standard MiniDV tape, which was innovative for its time. This allowed filmmakers to easily transfer footage to their editing systems without needing extensive additional equipment. Additionally, the FX1 features a built-in HDMI output, enabling direct connection to high-definition displays for detailed playback of recorded footage.

The camcorder includes a range of manual controls, such as focus, iris, and shutter speed, which provide users with the flexibility to fine-tune their settings. A 3.5-inch swing-out LCD screen allows for easy monitoring and composition, while an electronic viewfinder ensures accurate framing in bright conditions.

Overall, the Sony HDR-FX1 marked a significant milestone in the evolution of video technology, combining accessibility with professional features, making it a beloved choice among videographers and filmmakers looking to dive into the world of high-definition video. Its legacy continues to influence subsequent camcorder designs and remains a respected model in the realm of digital filmmaking.
Top Page Image Contents