Fishman Stereo Amplifier manual Presys Quick Start

Page 2

Presys Quick Start

1.Set the controls • Set volume off. Set the bass, middle, and treble controls to center.

2.Plug in • Connect the Presys to an ampliﬁer or PA with a ¼-inch instrument cable. The battery light (batt) will ﬂash once quickly to indicate it has switched on.

3.Turn up • Raise the volume and adjust the bass, middle, and treble controls to your liking.

Image 2

Contents User Guide Presys Onboard Preamp Presys Quick Start Presys Controls Sample EQ Settings Fingerstyle Scooped Mid Strummer Cut Through the MixFCC Compliance Notice