Safety Instructions | Flying Mole DADM310 instruction

Monaural Power Amplifier

DAD–M310

Owner’s Manual

Thank you for purchasing the DAD–M310.

In order to use it in a safe manner, please read this Owner’s

Manual thoroughly before using.

Also, keep this manual for future reference.

Accessory Checklist

Before proceeding with the setup, make sure that the following accessory is included in the package.

If it is missing, please contact the dealer whom you purchased the amplifier from, or Flying Mole Corp.

• AC Power Cable x 1

• Remote Connection

• Remote Power Control

• Owner's Manual

Cable (2m) x 1

Connector x 2

(this booklet) x 1

1 Safety Instructions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICE ABLE PARTS INSIDE. REFER SERVICING TO QUALI-FIED SERVICE PERSONNEL.

THIS SYMBOL INDICATES THAT DANGEROUS	THIS SYMBOL INDICATES THAT THERE ARE IMPOR-
VOLTAGE CONSTITUTING A RISK OF ELECTRIC	TANT OPERATING AND MAINTENANCE INSTRUC-
SHOCK IS PRESENT WITHIN THIS UNIT.	TIONS IN THE OWNER’S MANUAL WITH THIS UNIT.

WARNING : To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

■The important safety instructions

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with dry cloth.

7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampli- fiers) that produce heat.

9.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11.Only use attachments/accessories specified by the manufacturer.

12.Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13.Unplug this apparatus during lightning storms or when unused for long periods of time.

14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operated normally, or has been dropped.

THE APPARATUS IS NOT WATERPROOF. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE AND DO NOT PUT ANY WATER SOURCE NEAR THIS APPARATUS, SUCH AS VASE, FLOWER POT, COSMETICS CONTAINER AND MEDICINE BOTTLE, ETC.

IMPORTANT NOTICE

If this product is found to be the source of interference, which can be determined by turning the unit “OFF” and “ON”, please try to eliminate the problem by using one of the following measures :

Relocate either this product or the device that is being affected by the interference.

Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s. In the case of radio or TV interference, relocate/reorient the antenna.

If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial type cable.

If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Flying Mole Corporation.

2 Features

● Equipped with high-speed, floating, full-resonance

Component Names

● INPUT: UNBAL - VARIABLE

● IN

switching regulator

● Flying Mole Bi-Phase PWM amplifier technology realizes

a new level of high sound quality with stunning high-

speed responsiveness and wide dynamic range.

● Equipped with real-time current limiter

● Gorgeous parts for uncompromising standards

● General-purpose input interface allows connection with

various types of preamplifiers

The level can be adjusted with the LEVEL adjust- ment knob w on the front panel.

(Switch position: center)

●INPUT: BAL - VARIABLE

The level can be adjusted with the LEVEL adjust- ment knob w on the front panel.

Used to interlock the power on this product with the activation/deactivation of power on another de- vice.

Connect these inputs to a Flying Mole product equipped with remote power control trigger out- puts.

Turn “ON” the power switch of the amplifier to use the amplifier with cables connected to these connectors.

*Refer to the owner’s manuals of the devices to be connected as well.

*These connectors cannot be used with products from other manufactures or for other purposes than the above-mentioned purpose.

3 Component Names

■ Front Panel

■ Rear Panel

(Switch position: right)

rSPEAKER Outputs

Used to connect the output signal from the amplifier. Connect to the speaker with SP cables.

tOUTPUT Connector (Balanced)

iMODE Selector

Used to switch if the power is controlled by the POWER switch or by REMOTE POWER CONTROL trigger signals.

●MANUAL ON MODE

The power is turned ON or OFF with the POWER switch q on this product.

qPower Switch / Power Indicator

Used to turn the amplifier’s power ON or OFF.

The ON indicator (blue) lights when the power is turned on.

When the power amplifier is on standby in REMOTE ON MODE (refer to i), the SLEEP indicator (orange) is on.

wLEVEL Adjustment Knobs

e r

t y u i

eINPUTS / INPUT Selector

Used to connect the input signal to the amplifier. Connect an input to a preamplifier, etc.

Select one of the following settings depending on which input is connected.

●INPUT: UNBAL - FIXED

The LEVEL adjustment knob w on the front panel is bypassed.

When balanced signals are input, the same signals as the input signals are output. The signal arrange- ment of the BALANCE OUTPUT on this product is:

1:GND

2:HOT, and

3:COLD

yAC IN CONNECTOR

Used to connect the supplied AC power cable to the amplifier.

Connect the other end of the AC power cable to household AC outlet.

uREMOTE POWER CONTROL Connectors

●OUT

Used to interlock the power on the device con- nected to this product with the activation/deacti-

*The power is not switched by REMOTE POWER CON- TROL trigger signals.

●REMOTE ON MODE

The power is interlocked with the activation/deac- tivation of power on the device connected to the REMOTE POWER CONTROL (IN) of this prod- uct.

* Set the POWER switch q of this product to ON posi-

tion.

Used to control the output level.

Setting the knob to “0” turns down the level to the minimum.

(Switch position: left)

vation of power on this product.

Connect these outputs to a Flying Mole product equipped with remote power control trigger inputs.

The REMOTE POWER CONTROL function does not

work if the POWER switch q is turned OFF.

DADM310 specifications

The Flying Mole DADM310 is a state-of-the-art digital audio device designed to meet the needs of audiophiles, sound engineers, and music enthusiasts alike. This innovative product stands out in the competitive market of audio equipment due to its unique combination of high-performance capabilities, advanced technologies, and user-friendly features.

One of the key characteristics of the DADM310 is its remarkable sound quality. Equipped with high-resolution digital-to-analog converters (DACs), it ensures that audio playback is incredibly accurate, delivering a crystal-clear sound that captures the nuances of every note. The device supports various audio formats, including lossless options, allowing users to experience their music in its purest form.

The DADM310 also features an advanced digital signal processing (DSP) engine that enhances audio playback through sophisticated algorithms. This technology facilitates precise equalization, dynamic range processing, and room correction, enabling the device to adapt to different listening environments. Users can customize their sound profiles, making it an ideal choice for both studio settings and home use.

Connectivity options are another highlight of the DADM310. It includes multiple digital inputs, including USB, optical, and coaxial connections, making it compatible with various audio sources. For wireless connectivity, the device supports Bluetooth and Wi-Fi streaming, which allows users to enjoy their favorite tracks from smartphones, tablets, and computers without the hassle of wires.

Another stand-out feature is the DADM310’s intuitive user interface. The device is equipped with a clear, high-resolution display that provides easy navigation through menus and settings. The controls are designed for ease of use, ensuring that even those who may be less tech-savvy can operate it smoothly.

The build quality of the Flying Mole DADM310 is exemplary, showcasing a sleek and modern design that fits seamlessly into any audio setup. Its robust construction not only enhances its aesthetic appeal but also ensures durability, making it a worthwhile investment for long-term use.

In summary, the Flying Mole DADM310 is a remarkable audio device that combines cutting-edge technology with superior sound quality and user-friendly features. Whether for casual listening or professional applications, it serves as a versatile and reliable solution for all audio needs.