Important Regulatory and Safety Notices

Important Regulatory and Safety Notices

Before using this product and any associated equipment, refer to the “Important Safety Instructions” listed below so as to avoid personnel injury and to prevent product damage.

Products may require specific equipment, and /or installation procedures be carried out to satisfy certain regulatory compliance requirements. Notices have been included in this publication to call attention to these Specific requirements.

Symbol Meanings

Warning

Caution

Notice

ESD Susceptibility

This symbol on the equipment refers you to important operating and maintenance (servicing) instructions within the Product Manual Documentation. Failure to heed this information may present a major risk of damage or injury to persons or equipment.

The symbol with the word “Warning” within the equipment manual indicates a potentially hazardous situation, which if not avoided, could result in death or serious injury.

The symbol with the word “Caution” within the equipment manual indicates a potentially hazardous situation, which if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.

The symbol with the word “Notice” within the equipment manual indicates a situation, which if not avoided, may result in major or minor equipment damage or a situation which could place the equipment in a non-compliant operating state.

This symbol is used to alert the user that an electrical or electronic device or assembly is susceptible to damage from an ESD event.

Important Safety Instructions

Caution

Warning

This product is intended to be a component product of the openGear 8000 series frame. Refer to the openGear 8000 series frame User Manual for important safety instructions regarding the proper installation and safe operation of the frame as well as it’s component products.

Certain parts of this equipment namely the power supply area still present a safety hazard, with the power switch in the OFF position. To avoid electrical shock, disconnect all A/C power cords from the chassis' rear appliance connectors before servicing this area.

Service barriers within this product are intended to protect the operator and service personnel from hazardous voltages. For continued safety, replace all barriers after any servicing.

Warning	This product contains safety critical parts, which if incorrectly replaced may
	present a risk of fire or electrical shock. Components contained within the
	product’s power supplies and power supply area, are not intended to be
	customer serviced and should be returned to the factory for repair.
	To reduce the risk of fire, replacement fuses must be the same type and
	rating.
	Only use attachments/accessories specified by the manufacturer.

9252 specifications

Cobalt Networks 9252 is a powerful and versatile rack-mounted server designed to deliver exceptional performance for various applications in networking and server management. As technology continues to advance, the 9252 stands out with its robust specifications and reliability, making it a favored choice for businesses looking to enhance their IT infrastructure.

One of the main features of the Cobalt Networks 9252 is its dual-processor architecture. This server model typically supports dual Intel Xeon processors, which significantly boosts processing power and provides the necessary capacity to handle intensive workloads. This architecture ensures that the server can deliver fast and efficient performance, making it ideal for running complex applications and managing large databases.

The Cobalt Networks 9252 also comes equipped with a substantial amount of RAM, which can often support configurations up to 32GB or more. This high memory capacity enables the server to run multiple applications simultaneously without degrading performance. It is particularly beneficial for businesses that rely on real-time data processing and require quick access to information.

In terms of storage, the 9252 offers several options, including support for RAID configurations. This flexibility allows businesses to optimize their data protection and retrieve capabilities, mitigating the risk of data loss. The server typically supports various drive types, including SSDs and traditional HDDs, providing users with a tailored approach to meet their storage requirements.

Networking capabilities of the Cobalt Networks 9252 are highly commendable. The server often includes multiple Gigabit Ethernet ports, allowing for high-speed network connectivity and ensuring that multiple users can connect without bottlenecks. Additionally, the server is designed with advanced networking features that provide enhanced security and data integrity.

The Cobalt Networks 9252 is built with a focus on reliability and durability. The server chassis is designed to fit standard server racks, promoting efficient airflow and cooling. This design minimizes overheating risks and prolongs the server's lifespan, making it a sustainable investment for businesses.

Furthermore, the server is compatible with various operating systems, giving users the freedom to choose the software that best fits their operational needs. Whether utilizing Linux, Windows Server, or other operating systems, the Cobalt Networks 9252 adapts well to multiple environments.

In conclusion, the Cobalt Networks 9252 is a robust server that combines powerful processing capabilities, flexible storage options, and advanced networking features. Its design prioritizes performance, reliability, and longevity, making it an ideal solution for businesses looking to enhance their IT infrastructure and support their growing technological needs.