Sony DCR-HC52, DCR-HC54 manual Prepare your camcorder for playback, Dubbing/Editing

bNotes

•When you are connecting your camcorder to a monaural device, connect the yellow plug of the A/V connecting cable to the video input jack, and the red (right channel) or the white (left channel) plug to the audio input jack on the device.

•When you connect a device via an A/V connecting cable, set [DISP OUT] to [LCD] (the default setting) (p. 43).

1 Prepare your camcorder for playback.

Insert the recorded cassette.

Slide the POWER switch repeatedly to turn on the PLAY/EDIT lamp.

2 Insert the recording media in the recording device.

If your recording device has an input selector, set it to the appropriate input (such as video input1, video input2).

3 Connect your camcorder to the recording device (VCR or DVD/ HDD recorder) with the A/V connecting cable (supplied) 1, an A/V connecting cable with S VIDEO (optional) 2 or an i.LINK cable (optional) 3.

Connect your camcorder to the input jacks of the recording device.

4 Start playback on the camcorder, and recording on the recording device.

Refer to the operating instructions supplied with your recording device for details.

5 When dubbing is complete, stop your camcorder and the recording device.

bNotes

•To record the date/time and camera settings data when connected by the A/V connecting cable, display them on the screen (p. 34).

•The following cannot be output via the DV Interface (i.LINK):

–Indicators

–Pictures edited using [P EFFECT] (p. 38)

•When connected using an i.LINK cable, the recorded picture becomes rough when a picture is paused on your camcorder while recording.

•When connected using an i.LINK cable, data code (date/time/camera settings data) may not be displayed or recorded depending on the device or application.

Dubbing/Editing

45