Sony 900P, MSW-900 specifications Specifications

Specifications

MSW-900

MSW-900P

	Weight	7 lb 11 oz (Approx. 3.5 kg)
		11 lb 10 oz (with VF, Mic, BCT-60MX, BP-L60A) (5.3 kg)
	Power requirements	DC 12 V +5.0 V/-1.0 V
	Power consumption	Approx. 27 W
General	Operating temperature	+32 °F to +104 °F (0 to 40 °C)
	Storage temperature	-4 °F to+140 °F (-20 to +60 °C)
	Humidity	25 to 85% (relative humidity)
	Continuous operating time	Approx. 135 min w/BP-L60A
		Approx. 200 min w/BP-L90A
	Genlock video	BNC type x1, 1.0 Vp-p, 75 Ω
Signal inputs	Time code input	BNC type x1, 0.5 to 18 Vp-p, 10 kΩ
	Audio (CH-1/2)	XLR-3-31 type x2, -60 dBm/+4 dBm selectable, high impedance, balanced
	Mic input	XLR-3-31 type x2, -60 dBm/+4 dBm selectable, high impedance, balanced
	Video output	BNC type x1, 1.0 Vp-p, 75 Ω
	Video test output	BNC type x1, 1.0 Vp-p, 75 Ω
Signal outputs	Time code output	BNC type x1, 1.0 Vp-p, 75 Ω
	Earphone	Minijack x2
	Audio output (CH-1/CH-2)	XLR-5-pin male (stereo)
	Lens	12-pin
	Remote	8-pin
	Light	2-pin, DC 12 V, max. 50 W
Others	DC input	XLR-4-pin (for the optional AC-550/550CE)
	DC output	4-pin (for wireless microphone receiver), DC 12 V
	Camcorder adapter	40-pin
	Wireless receiver input	D-Sub 15-pin
	Recording format	MPEG IMX
	Tape speed	64.467 mm/s	53.776 mm/s
VTR section	Playback/Recording time	Max. 60 min w/BCT-60MX cassette	Max. 71 min w/BCT-60MX cassette
	Fast forward time	Approx. 5 min. w/BCT-60MX
	Rewind time	Approx. 5 min. w/BCT-60MX
	Recommended tape	Sony MPEG IMX S cassette (BCT-6MX/12MX/22MX/32MX/60MX)
	Sampling frequency	Y: 13.5 MHz, R-Y/B-Y: 6.75 MHz
Digital video	Quantization	8 bits/sample
	Error correction	Reed-Solomon code
performance
	K-factor (2T pulse)	Less than 1%
	Y/R-Y/B-Y delay	Less than 15 ns
	Sampling frequency	48 kHz (synchronised with video)
	Quantization	20/16bits/ sample (selectable)
	A/D and D/A quantization	A/D:20 bits/sample, D/A:16 bits/sample
	Frequency response	20 Hz to 20 kHz, +0.5 dB/-1.0 dB
Digital	Dynamic range	More than 85 dB (emphasis ON)
audio	Distortion (at 1 kHz, emphasis ON, reference level)	Less than 0.08%
performance
	Cross talk (at 1 kHz, reference level)	Less than -70 dB
	Wow & flutter	Below measurable limit
	Head room	20 dB (ex-factory setting)
	Emphasis (ON/OFF selectable)	T1=50 µs, T2=15 µs
	* The specifications given above were measured via CA-701/702 Camcorder	Adapter or MSDW-902 SDI output board.
	Pickup device	3-chip 2/3-inch type 16:9 widescreen Power HAD EX CCD
	Total picture elements	1038(H) x 1008(V)	1038(H) x 1188(V)
	Optical system	F1.4 prism
	Built-in optical filters	1: Clear, 2: 1/4ND, 3: 1/16ND, 4: 1/64ND, A: CROSS, B: 3200K, C: 4300K, D: 6300K
	Shutter speed	1/100, 1/125, 1/250, 1/500, 1/1000, 1/2000 (s)	1/60, 1/125, 1/250, 1/500, 1/1000, 1/2000 (s)
	Lens mount	Special bayonet mount
Camera	Sensitivity (2000 lx, 89.9% reflectance)	F11 (typical)
	Minimum illumination	Approx. 0.15 lx (F1.4 lens, +48 dB turbo gain)
section
	Smear level	-140 dB (typical)
	S/N ratio	-65 dB (typical)	-63 dB (typical)
	Vertical resolution	400 TV Lines/450 TV Lines(EVS)	480 TV Lines/530 TV Lines(EVS)
	Registration	0.05% (all zones, w/o lens)
	Geometric distortion	Below measurable level (w/o lens)
	Warm-up time	2 s
	Modulation depth at 5MHz	70%(16:9, typical)/55%(4:3, typical)
	CRT	2.0-inch monochrome
Viewfinder	Controls	BRIGHT, CONTRAST, PEAKING controls, TALLY, ZEBRA, DISPLAY switches
	Horizontal resolution	450 TV lines (16:9)
	Microphone	Ultra-directional (Detachable)
		Operation manual (x1)
		Viewfinder (x1)
Supplied		Lens cap (x1)
accessories		Shoulder belt (x1)
		Monaural microphone (x1)
		XLR connector cap (x4)

13