April 1995
CURRENT INFORMATION SUMMARY
Opening Instructions for the
KODAK MAX Flash
Wear eye protection when opening all cameras.
1 Wind off |
Shutter Button |
Thumbwheel |
•Check the frame counter window.
•X’s must be visible.
•If not, grip camera, press shutter button, and turn thumbwheel untill film is fully rewound.
3 Remove Film |
• Use tool to bend cover back and remove film.
2 Open Film Door |
• Insert special tool into end slot (as shown).
CAUTION: This camera body contains a high voltage capacitor and circuit board. To avoid electric shock, do not pry apart the front and back sections of camera. Remove only film and battery from their respective compartments. If sections of the camera are separated, do not touch the circuit board.
4 Remove Battery
Opened Camera with film and battery removed.
Battery | Exposed Film |
•Repeat the same steps at opposite end of camera to remove battery.
5 | • Place in recycle bin. |
• Return to Kodak for recycling. |
CAUTION: To avoid injury, use tool carefully.
©Eastman Kodak Company, 1996