IBM 5079, 578, 5078, 5074 manual Verifying Your New Configuration

Page 39

Chapter 6. Verifying Your New Configuration

Verify your new configuration by performing the following: __ 1. Type strsst on the command line. Press Enter.

__ 2. Type your service tools userid and service tools password on the System Service Tools (SST) Sign On display.

Press Enter.

__ 3. Select Start a service tool from the Start a Service Tools display and press Enter.

__ 4. Select Hardware service manager on the Start a Service Tool display.

Press Enter.

__ 5. Select Packaging hardware resources (system, frames, cards...) on the Hardware Service Manager display.

Press Enter.

Your new 0578, 5074, 5078 or 5079 expansion unit appears on the list. Record the Frame ID and Resource name here:___________ , ___________. If

your expansion unit does not appear, you need to verify your installation by performing these steps:

__ a. Make sure that you powered on your expansion unit.

__ b. Make sure that you installed the cables correctly. Refer to Chapter 2, “Setting up your 5074 expansion unit” on page 9, Chapter 3, “Setting up your 0578 expansion unit” on page 15 or Chapter 4, “Setting up your 5079 Expansion Unit” on page 19.

__ 6. You can verify vital product data (VPD) for your new expansion unit:

__ a. Press F3 to return to the Hardware Service Manager display.

__ b. At the Hardware Service Manager display, select System power control network (SPCN).

__ c. Press the Enter key twice.

__ d. To update VPD data, do the following:

1)If you installed a 5079, you need to find the Frame ID for both 5079–002 and 5079–001 and the system Serial Number.

2)You can also find the Frame ID by looking at the display on the expansion unit. For example, if the Frame ID for your 5079–002 (the upper unit) is 4, a *04 will appear on the display.

__ e. Enter a 3 (Write VPD) for your expansion unit. Press Enter.

Example: If the Frame ID for your expansion unit is 2, enter option 3, as is shown in the example below. Use the Frame ID with a 0 in the Unit field.

© Copyright IBM Corp. 2000, 2002

29

Page 38 Page 40
Image 39
Page 38 Page 40
Contents ERserver Page ERserver Third Edition August Contents Page Safety and Environmental Notices Environmental Design Laser Safety InformationBattery Return Program Product Recycling and DisposalWho should read this book Prerequisite and related informationISeries Navigator How to send your comments Preparing to set up your 5074 or 5079 Expansion Unit Hardware requirementsSite planning considerations for Planning your cable layout Identifying HSL and Spcn CablesPlacing power cords for Planning for redundant link with two expansion units System or expansion unit Configuration rules Configuration rulesPowering down your iSeries system unit Preparing to set up your 5074 or 5079 Expansion Unit Setting up your 0578, 5074, 5078 or 5079 Expansion Unit V5R2 Connecting your 5074 directly to your system unit Setting up your 5074 expansion unitConnecting your 5074 to another expansion unit HSL connections Connecting your 5074 at the beginning of a loopRemove or open the back cover from your 5074. See Appendix a Connecting your 5074 to the middle of a loop Connecting your 5074 to the end of a loop Connecting your 0578 directly to your system unit Setting up your 0578 expansion unitSetting up your 0578, 5074, 5078 or 5079 Expansion Unit V5R2 Setting up your 0578 expansion unit Setting up your 0578, 5074, 5078 or 5079 Expansion Unit V5R2 Connecting your 5079 directly to your system unit Setting up your 5079 Expansion UnitHSL Connections Setting up your 5079 Expansion Unit Connecting your 5079 at the beginning of a loop Connecting your 5079 to another expansion unitConnectors Connecting your 5079 in the middle of a loop Connecting your 5079 to the end of a loop Connect the HSL cable that you installed in b to HSL Yes No Completing your installationSetting up your 0578, 5074, 5078 or 5079 Expansion Unit V5R2 Verifying Your New Configuration Frame Unit Type Number Fault 00-00000 Appendix A. Removing the back covers 820 back cover5074, 830 and 890 back cover Open the back cover on your 5079 by pressing the latch at 840 back coverOpening the 5079 and 840 back cover Accessing units in a rack HSL connector locations Appendix B. Connector LocationsHSL connector locations Appendix B. Connector Locations HSL connector locations Connector locations Connector locationsConnector locations Connector locations Setting up your 0578, 5074, 5078 or 5079 Expansion Unit V5R2 Appendix C. System unit control panel Setting up your 0578, 5074, 5078 or 5079 Expansion Unit V5R2 System unit Rule HSL loop with HSL loop with four external units Spcn loop with HSL loop with Setting up your 0578, 5074, 5078 or 5079 Expansion Unit V5R2 Copyright IBM Corp IBM TrademarksPage Industry Canada Compliance Statement Electronic Emission NoticesIndustry Canada Compliance Statement Setting up your 0578, 5074, 5078 or 5079 Expansion Unit V5R2 How satisfied are you that the information in this book is Readers’ Comments We’d Like to Hear from YouBusiness Reply Mail Page SA41-5149-02

5078, 5079, 578, 5074 specifications

The IBM 5074, 578, 5079, and 5078 are part of IBM's influential line of midrange computer systems that emerged during the late 1970s and early 1980s. These models were pivotal in the evolution of business computing at a time when companies were increasingly adopting automated systems for data processing tasks.

The IBM 5074, also known as the IBM 5100 Series, was particularly notable for being one of the first portable computers, offering a versatile computing environment for both technical and business applications. It featured an impressive combination of hardware and software capabilities, including a built-in keyboard, a screen, and the ability to run various programming languages. Both APL and BASIC were readily available, making it a popular choice for developers and mathematicians alike.

The 578 model was an advanced variant of the 5074, emphasizing enhanced performance and expanded memory capacity. The 578 integrated more sophisticated I/O capabilities, which included diverse connection options for external devices. This system was geared toward small and medium enterprises requiring robust computing power without the complexities of mainframe management.

The IBM 5079, on the other hand, distinguished itself with its unique multi-user capabilities, allowing for simultaneous access by multiple users. This built-in support for multitasking made it a formidable tool in office environments where collaboration and efficient resource sharing were paramount. Its operating system was designed to optimize performance across various applications, facilitating smoother operations in busy work environments.

Lastly, the IBM 5078 served as a bridge between traditional minicomputers and the growing demand for microcomputing solutions. It included critical innovations in processing speed and data handling capabilities, allowing businesses to better manage their operations. With a focus on reliability and uptime, the 5078 was engineered for critical business functions that demanded robust performance in a pragmatic package.

Together, these models underscored IBM's commitment to innovation and adaptability in the computing landscape of the late 20th century. They set the groundwork for future advancements in personal computing and enterprise systems, influencing generations of technology that followed. Their legacy is a testament to the evolution of computing technology, showcasing concrete advancements in capability, efficiency, and user accessibility.
Top Page Image Contents