Inputs, Limiter, LOW CUT Filter | American Audio V3000/V2000

2 ON=30Hz

OFF=50Hz

Low

Cut Filter

INPUTS

Two input connector, XLR jack for balance and 6.3mm (1/4”) TRS jack for unbalance.

INVERTING INPUT -

•BALANCED

GROUND

•UNBALANCED

GROUND

•SYMETRIQUE

•SYMMETRISCHE

•BALANCEADO

NON-INVERTING INPUT +

•ASYMETRIQUE

•UNSYMMETRISCHE

•UNBALANCEADO

NON-INVERTING INPUT +

OUTPUTS (Banana Jack Connection)

Strip back insulation 13-mm. Insert wire fully, tighten barrel.

13mm

1/2”

LIMITER

The limiter has a fixed threshold and will prevent continuous clipping. Below clipping, and during short clips on peaks, the limiter does not act on the audio signal. The limiter for either channel can be disabled independently using the slide switch on the front panel.

LOW CUT FILTER

OFF

CH. 1

The low-cut filter removes ultra-low frequency information from the audio signal 1 that could damage or cause distortion in a loud speaker system. The dip switch on the rear panel allows you to enable or disable the filter independently for either Channel, as well as set it for either a 50Hz or 30 Hz cut-off. Always use

the 50 Hz filter setting if you are using the amplifier to drive a distributed line system (also a constant-voltage line, 70 volt line, etc.)

CH.2

3ON=30Hz

OFF=50Hz

4Low Cut Filter

known as

Page 6 • American AUDIO V3000 / V2000 MK II Power Amplifier Instructions

V3000/V2000 specifications

The American Audio V3000 and V2000 mixers represent a sophisticated fusion of advanced technology and user-friendly design, making them highly sought-after tools for DJs and music enthusiasts alike. These mixers are engineered to meet the demanding needs of live performances, studio recordings, and mobile DJ setups.

One of the standout features of the V3000 and V2000 is their robust construction, ensuring durability and reliability during intensive use. Both models feature an intuitive layout with clear labeling, facilitating easy navigation and control even for novice users. The mixer’s design prioritizes ergonomics, allowing DJs to perform for extended periods without discomfort.

The V3000 and V2000 mixers are equipped with high-quality, responsive faders that provide smooth control over sound mixing and transitions. The use of precision potentiometers coupled with a high-quality signal path results in excellent audio fidelity, ensuring that every mix sounds professional. These mixers also incorporate EQ controls, allowing users to sculpt their sound with precision, enhancing the overall audio experience.

Connectivity is a vital aspect of any DJ mixer, and both the V3000 and V2000 do not disappoint. They feature multiple channels with various inputs, including RCA, XLR, and 1/4-inch jacks. This diverse connectivity allows users to connect a wide range of audio sources, such as turntables, CD players, and laptops, making them versatile tools for any setup.

Another notable aspect of these mixers is their integrated effects units. DJs can embellish their mixes with a range of effects, enhancing creativity during live performances. The effects can be applied to specific channels or the master output, offering flexibility in sound manipulation.

Moreover, the V3000 and V2000 are designed with advanced monitoring capabilities. With multiple headphone outputs and monitoring options, DJs can cue tracks seamlessly, ensuring smooth transitions between songs.

In addition to these core features, both mixers exhibit modern aesthetics with bright LED indicators, facilitating visibility even in low-light environments, which is often a critical factor in live DJ performances.

In conclusion, the American Audio V3000 and V2000 mixers blend advanced technology, versatility, and user-friendly features to cater to the evolving needs of today’s DJs. Whether for live shows, studio recordings, or casual use, these mixers provide exceptional performance and reliability, establishing them as valuable assets in the world of audio mixing.