Sony CCD-TR930 Items for VTR mode only, To look at the demonstration at once

Page 26

Changing the mode settings

AUTO DATE∗ <ON/OFF>

•Select ON to record the date for 10 seconds after recording has started. •Select OFF not to record the date.

CLOCK SET∗

Select this item to reset the date or time.

DEMO MODE∗ <ON/OFF>

•Select ON to make the demonstration appear without cassette. •Select OFF to deactivate the demonstration mode.

Notes on DEMO MODE

•DEMO MODE is set to STBY (Standby) at the factory and the demonstration starts about 10 minutes after you set the POWER switch to CAMERA without inserting a cassette. Note that you cannot select STBY of DEMO MODE in the menu system.

•You cannot select DEMO MODE when a cassette is inserted in the camcorder.

•If you insert a cassette during the demonstration, the demonstration stops. You can start recording as usual. DEMO MODE automatically returns to STBY.

To look at the demonstration at once

Eject the cassette, if inserted. Select ON of DEMO MODE and erase the menu display. The demonstration will begin. When you turn off the camcorder once, DEMO MODE automatically returns to STBY.

Items for VTR mode only

EDIT <ON/OFF>

•Select ON to minimize picture deterioration when editing. •Normally select OFF.

HiFi SOUND <STEREO/1/2>

•Normally select STEREO.

•Select 1 or 2 to play back a dual sound track tape.

TBC∗ <ON/OFF>

•Select ON to correct for jitter. •Select OFF not to correct for jitter.

The picture may not be steady when played back.

Note on TBC setting

Set TBC to OFF when playing back: •A tape you have dubbed over.

•A tape on which you recorded the signal of a TV game or similar machine.

If the playback picture fluctuates while you hold the camcorder, set TBC to OFF.

DNR∗ <ON/OFF>

•Select ON to reduce noise. •Select OFF to not reduce noise.

The following settings work only during playback

EDIT, HiFi SOUND, TBC, and DNR.

∗ These settings are retained even when the battery is removed, as long as the lithium

26

battery is in place.

Image 26

Contents Video Camera Recorder For the customers in Canada WelcomeFor the Customers in the U.S.A Table of contents Precautions on camcorder care Using this manualPrecaution on copyright Checking supplied accessories Charging time Charging and installing the battery packCharging the battery pack To remove the battery pack Charging and installing the battery packBattery lifee Installing the battery pack When you record in a low angle To restore the viewfinderTo prevent accidental erasure Inserting a cassetteTo eject the cassette Camera recording CameraTo finish recording b Camera recordingTo stop recording momentarily a To focus the viewfinder lensCounter Reset When moving from indoors to outdoors or vice versaZooming speed Variable speed zooming Using the zoom featureWhen you shoot a subject using a telephoto zoom To return to normal recording Selecting the SATRT/STOP modeTo extend the recording time in 5 SEC mode Hints for better shooting Place the camcorder on a flat surface or use a tripodTo begin re-recording Checking the recorded pictureTo stop playback To connect to a VCR or TV without Video/Audio input jacks Connections for playbackIf your VCR or TV is a monaural type Playing back a tape Using the AV cordless IR receiver Laser LinkTo cancel the Laser Link function IR transmitterPlaying back a tape Using the remote commanderTo display the viewfinder screen indicators on the TV To select the playback sound To locate a scene picture searchTo view the picture at 1/5 speed slow playback To remove the connecting plate Using alternative power sourcesUsing the house current Battery Life Using alternative power sourcesUsing alkaline batteries Using a car batteryChanging the mode settings VTRChanging the mode settings Items for Camera mode onlyTo look at the demonstration at once Items for VTR mode onlyFollowing settings work only during playback HiFi Sound STEREO/1/2To cancel the fade-in/fade-out function When fading in aWhen fading out b Fade-in and fade-outUsing the wide mode function Using the wide mode functionSelecting the desired mode FullTo watch the tape recorded in wide mode Using the wide mode functionTo cancel wide mode Enjoying picture effectTo turn off picture effect Using picture effect functionEnjoying picture effect Focusing manually When to use manual focusTo return to autofocus mode Focusing manuallyFocusing manually To record a very distant subjectUsing the Program AE function Selecting the best modeTo turn off program AE Using the Program AE functionUsing the Program AE function After shooting To make a fine adjustmentShooting with backlighting Adjusting the exposure Adjusting the exposureWhen to adjust the exposure To return to automatic exposure modeSelecting the language Adjusting the exposureSuperimposing a title Shooting in the darkTo add the title while you are recording Using titles To add the title from the beginningSuperimposing a title Titles cycle as followsTo select the color of the title To select the position of the titleTo delete a title Making your own titlesTo edit the title you have stored Recording with the date/time To stop recording with the date and/or timeTo check if you have performed ORC Optimizing the recording conditionIf the cassette has been ejected Starting editing Si nal flow Editing onto another tapeBefore editing To edit more scenesTo stop recording Recording from a VCR or TVTo check the picture from a VCR or TV before recording Releasing the Steady Shot function To activate the Steady Shot function againChanging the lithium battery in the camcorder Changing the lithium batteryResetting the date and time To correct the date and time settingResetting the date and time Usable cassettes and playback modesTo save battery power Tips for using the battery packBattery life is shorter in a cold environment When to replace the battery packTips for using the battery pack Brand-new battery pack How the battery consumption is displayedTo obtain more accurate remaining battery indication Recharge the battery pack whenever you likeMoisture condensation Maintenance information and precautionsHow to prevent moisture condensation Inside the camcorderPrecautions Camcorder operation Maintenance information and precautionsVideo head cleaning On handling tapesCharging AC power adaptorCamcorder care OthersDifference in color systems Using your camcorder abroadPower sources Camcorder SymptomTrouble check Symptom Cause and/or Corrective Action Trouble checkPicture When the Charge lamp flashes again When the Charge lamp flashesSymptom Corrective Actions AgainSelf-diagnosis function First three digits Cause and/or Corrective ActionSpecifications Video camera recorderIdentifying the parts @¥ VIDEO/AUDIO jacks p.18 @ MIC jack Plug in PowerIdentifying the Parts @» Intelligent accessory shoe @» #¼$ª $£ $¼ Video control buttons p.20To exit demo mode Remote CommanderTo enter demo mode To watch the demonstrationTo avoid damage from possible battery leakage To prepare the Remote CommanderTo use the Remote Commander Remote control direction Attaching the shoulder strapDisplay window Operation indicatorRemaining tape indicator Tape has run out Battery is weak or deadTape is near the end Index