Sony CCD-TRV338 manual Dubbing selected scenes from a tape, Digital program editing TRV280

Dubbing selected scenes from a tape

– Digital program editing ( TRV280)

You can select up to 20 scenes (programs) and record them in the desired order to other recording device such as VCR.

Delete unwanted scene

Change the order

Results of editing

Step 1: Preparing your camcorder and VCR for operation

Follow the steps below when you are performing digital program editing for the first time to a tape in a VCR. You can skip this setting if you have set up the VCR by the following procedure before.

bNotes

•You cannot perform the Digital program editing on the following devices:

–a VCR that does not support [IR SETUP] codes

–a DVD recorder, a DVD recorder equipped with an HDD, etc

•When your camcorder is connected to the VCR via

the DV Interface, you cannot record the title or indicators.

1 Connect your VCR to the camcorder as a recording device (p. 60).

You can use either the A/V connecting cable or the i.LINK cable to make the connection. The dubbing procedure is easier with the i.LINK connection.

2 Prepare your VCR.

•Insert a cassette for recording.

•Set the input selector to input mode, if your VCR has one.

3 Prepare your camcorder (playing device).

•Insert a cassette for editing.

•Slide the POWER switch repeatedly to select the PLAY/EDIT mode.

4 Press MENU.

5 Turn the SEL/PUSH EXEC dial to select (OTHERS), then press the dial.

6 Turn the SEL/PUSH EXEC dial to select [VIDEO EDIT], then press the dial.

VIDEO EDIT		0:08:55:06
MARK	1	IN
UNDO
ERASE ALL
START
EDIT SET
TOTAL	0:00:00:00
SCENE	0
[MENU] : END

7 Turn the SEL/PUSH EXEC dial to select [EDIT SET], then press the dial.

VIDEO EDIT		0:08:55:06
EDIT SET		IR
	CONTROL
	ADJ TEST
	”CUT–IN”
	”CUT–OUT”
	IR SETUP
	PAUSEMODE
	IR TEST
	RETURN
[MENU] : END

8 Turn the SEL/PUSH EXEC dial to select [CONTROL], then press the dial.

VIDEO EDIT		0:08:55:06
EDIT SET
	CONTROL		IR
			i. LINK
[MENU] : END

,continued

Dubbing/Editing

Dubbing/Editing

67