JVC GR-DVL105 specifications EN17, When a blank portion is recorded on a tape, Proper recording

Page 17

EN17

NOTE: Recording From The Middle Of A Tape

Time Code

During recording, a time code is recorded on the tape. This code is to confirm the location of the recorded scene on the tape during playback.

If recording starts from a blank portion, the time code begins counting from “00:00:00” (minute:second:frame). If recording starts from the end of a previously recorded scene, the time code continues from the last time code number.

To perform Random Assemble Editing ( pg. 43 – 48), time code is necessary. If during recording a blank portion is left partway through the tape, the time code is interrupted. When recording is resumed, the time code starts counting up again from “00:00:00”. This means the camcorder may record the same time codes as those existing in a previously recorded scene. To prevent this, perform “Recording From The Middle of A Tape” below in the following cases;

When shooting again after playing back a recorded tape.

When power shuts off during shooting.

When a tape is removed and re-inserted during shooting.

When shooting using a partially recorded tape.

When shooting on a blank portion located partway through the tape.

When shooting again after shooting a scene then opening/closing the cassette holder cover.

Display

 

 

 

 

 

 

 

Frames are not displayed

 

 

 

 

 

 

 

during recording.

 

 

 

 

 

 

 

 

 

Minutes

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Seconds

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Frames

TC 1

 

2 : 3

 

4 : 2

 

4

 

 

(25 frames = 1 second)

 

 

 

 

 

Recording From The Middle Of A Tape

1.Play back a tape to find the spot at which you want to start recording, then engage the Still Playback mode ( pg. 29).

2.Set the Power Switch to “ ” or “ ” while pressing down the Lock Button located on the switch, then start recording.

NOTES:

The time code cannot be reset.

During fast-forwarding and rewinding, the time code indication does not move smoothly.

The time code is displayed only when “TIME CODE” is set to “ON” (  pg. 23, 30).

When a blank portion is recorded on a tape

Time code

Time code

Time code

00:00:00

05:43:21

00:00:00

Tape

Already recorded scene

Blank

Newly recorded scene

Shooting start pointShooting stop point Shooting start point

Proper recording

Time code

Time code

Time code

00:00:00

05:43:21

05:44:00

Tape

Already recorded scene

New scene

Latest scene

Shooting start point

Shooting start point

Shooting start point

Image 17
Contents GR-DVL105 It is recommended that you Dear CustomerEN3 HS-V14KIT software AC Power RemoteAdapter/Charger Control Unit BN-V408U Release the stoppers on both ends of the Core Filter How To Attach The Core FilterCharging the Battery Pack PowerLithium-ion is vulnerable in colder temperatures About BatteriesTo Detach The Battery Pack Using AC PowerTilt the viewfinder upward 1 and slide the battery pack Approximate recording timeViewfinder Adjustment Grip AdjustmentShoulder Strap Attachment Tripod MountingPress MENU/BRIGHT. The Menu Screen appears Date/Time SettingsLoading/Unloading a Cassette 10 ENEN11 Recording Mode SettingSet the tape recording mode depending on your preference 12 EN To Adjust The Brightness Of The DisplayPress in the tabs on the lens cap to remove it While recording is in progressJournalistic Shooting EN13SELF-RECORDING OFFMotor Drive Mode Snapshot Mode Selection14 EN SnapshotEN15 16 EN Slide the Power Zoom Lever towards TZoom Zoom OutProper recording When a blank portion is recorded on a tapeEN17 To brighten the scene when natural lighting is too dim Feature Video Light18 EN Set Light OFF/AUTO/ON as requiredFeature Manual Focus Feature Auto FocusEN19 To obtain correct focus20 EN Using Menus For Detailed AdjustmentSee pg If you have selected , orMenu Screen Explanations EN21 Menu Screen Explanations EN23 Fade/Wipe Effects 24 ENPicture Wipe or Dissolve Selection To Deactivate The Selected EffectFader And Wipe Menu EN2526 EN To Deactivate The Selected ModeSlow Slow Shutter Shutter Variable Shutter SpeedEN27 Exposure ControlIris Lock 28 EN White Balance AdjustmentTo Return To Automatic White Balance To Change The Tint For RecordingAvailable only with the remote control provided  pg To Control The Speaker VolumeEN29 Playback Zoom and Playback Special Effects30 EN EN31 Playback SoundDisplay Playback Basic Connections 32 ENEN33 If using a VCR . . . go to step If not . . . go to stepConnection To a Personal Computer 34 EN pg Cable you wish to use to the camcorderMake sure all units are turned off Connection To a Video Unit Equipped With a DV ConnectorEN35 VCR Recording deck 36 ENDubbing To a VCR To use this camcorder as a player EN37Repeat steps 5 through 7 for additional editing 38 ENEN39 Installing The BatteriesRe-attach the battery compartment cover Functions Buttons 40 ENFeature Frame-By-Frame Playback Feature Slow-Motion PlaybackFeature Playback Zoom EN41To allow you to add creative effects to the playback image Feature Playback Special Effects42 EN EN43 VCR Code ListSET REMOTE/VCR Code You are now ready to try Random Assemble Editing44 EN JVC VCR equipped with a remote pause connectorMake Connections VCR other than aboveSelect Scenes EN45Automatic Editing to VCR 46 ENEN47 For More Accurate EditingDiagnosing VCR/CAMCORDER Timing Recording deck48 EN Adjustment of VCR/CAMCORDER TimingAudio Dubbing Set 12BIT Mode to Sound 2 or MIX Menu Screen  pgEN49 To hear the dubbed sound during playbackCorrective Action 50 ENEN51 Standby mode. Make sure 52 ENYou continue operations Within 5 minutes afterEN53 Not due to any defect Unit. Effective dots more Than 99.99 % 54 ENEN55 Or channel appropriate Video mode For video playback56 EN LCD Monitor/Viewfinder Indications During Recording EN57Required USE Cleaning Cassette Head CleaningLCD Monitor/Viewfinder Indications During Playback Indications FunctionEN59 345 6 7 # $ % 60 ENEN61 After Use Cleaning The Camcorder62 EN To avoid hazards To prevent damage and prolong service lifeEN63 64 EN Serious malfunctioning EN65About moisture condensation Date/Time Display  pg , 30 66 ENIcons  pg LCD monitor/Viewfinder  pg IndicationsTime Code  pg , 23, 30 EN67For Digital Video Camera 68 ENFor General EN69 For ConnectorsEnmemo MEMOEN71 GR-DVL105
Related manuals
Manual 72 pages 55.52 Kb

GR-DVL105 specifications

The JVC GR-DVL105 is a compact, versatile digital camcorder that was popular in the early 2000s, known for its user-friendly features and impressive video quality. This camcorder is part of the JVC Everio series, which aimed to provide an accessible yet powerful solution for amateur videographers and those looking to capture memorable moments with ease.

One of the standout characteristics of the JVC GR-DVL105 is its 1/4-inch CCD sensor, which ensures high-quality video recording. This camcorder can capture video in standard resolution, making it ideal for home videos and small projects. The GR-DVL105 supports both VHS-C and Mini DV formats, providing flexibility for users who may have existing tapes. This compatibility allows for easy transitioning between editing formats and playback options.

The camcorder features a 10x optical zoom lens, which enhances its ability to capture distant subjects with clarity. The zoom functionality is complemented by a digital zoom feature, providing even greater reach while still maintaining decent quality. The JVC GR-DVL105's automatic focus and exposure settings make it simple for users to get the right shot, allowing them to concentrate on creative aspects rather than technical details.

In terms of design, the JVC GR-DVL105 is compact and lightweight, fitting comfortably in the hand for extended shooting sessions. The camcorder is equipped with a 2.5-inch LCD screen that provides a clear view for framing and composing shots. This LCD is also helpful for playback, allowing users to review their footage conveniently. The user interface is straightforward, offering intuitive controls that facilitate easy navigation through settings and menus.

Battery life is another important feature of the JVC GR-DVL105. The camcorder is powered by a rechargeable lithium-ion battery, which provides several hours of recording time under normal shooting conditions. This longevity makes it suitable for day-long events or outings.

In terms of connectivity, the JVC GR-DVL105 includes various outputs for connecting to TVs and other devices, ensuring that users can easily share their content. Overall, the JVC GR-DVL105 represents a reliable choice for those seeking a functional and performant camcorder for capturing life's fleeting moments in quality video format.