JVC VN-C30U instruction manual IP Address, Subnet Mask, Default Gateway, Host Name, MAC Address

The setup consists of changing the contents of [Other Settings]. (The same setup is also available using the Setting tool provided with the standard controller.)

VN-C30U Settings page [Other Settings]

Items in [Other Settings]

[DHCP]	Set this to “Enable” when the DHCP is used.
[IP Address]	To change to the IP address assigned to or approved for
	the network administrator. (This is can be changed only
	when DHCP is not used.)
[Subnet Mask]	Similarly to the IP address, to set the value assigned to
	or approved for the network administrator
[Default Gateway]	To set the IP address of the default gateway
	If this is not used, set “0.0.0.0”.
[Host Name]	To specify the host name using up to 8 alphanumeric
	characters
	This should be set when access linkage using a host
	name is required in an environment allowing the use of
	the DNS (Domain Name System). The host name is
	displayed in the title bars of sub-windows including the
	control windows.
	Do not specify anything when the host name is not used
	or unknown.
[MAC Address]	A physical address proper to each product.
	* This cannot be changed.	7