JVC LST0420-001B Setting the Lens Switches TK-C215V4, RESET/SPOT RESET/SPOT button, LL Line Lock

Page 10

Introduction

Setting the Lens and

Switches (TK-C215V4)

Set the video setting switches on the camera unit before mounting it.

To set the switches, use a fine-tipped screwdriver.

ARESET/[SPOT]

B

R

B

LLPHASE

1 O

2 N 2

C

4

4

 

 

3

 

 

 

 

5

 

WHT.

 

 

 

 

 

6

 

 

 

7

 

BAL.

 

 

8

 

 

D

L H

IRIS

ELEVEL

FOCUS ADJUST

F

G

Function selection switch setting table (Items in bold are factory position)

 

 

OFF

ON

 

 

 

 

1

AGC

OFF

ON

2

SELECT

PHASE

WHT.BAL.

3

SYNC

LL

INT

4

WHT.BAL.

ATW

MANU

5

BLC

OFF

ON

6

DAY/NIGHT

OFF

ON

7

RESERVED

SET TO OFF

8

RESET/SPOT

RESET

SPOT

A [RESET/SPOT] RESET/SPOT button

When this button is pressed, the value of the white balance or phase adjusted manually is reset to the default value.

When the 2 [SELECT] switch is set to WHT.BAL., the white balance is reset to the default value.

When the switch is set to PHASE, the phase is reset to the default value.

When setting to SPOT:

When this button is pressed, white spots are corrected.

For instructions on correcting white spots, see AWhite-spot correctionB (A pg. 28).

B[R/B, +/-] R/B, +/- adjustment button

This button is pressed when manually adjusting the white balance or when adjusting the vertical phase of the line lock.

The function of this button is selected using the 2 [SELECT] switch.

When manually adjusting the white balance: Press the R button to increase the red tint and decrease the blue tint.

Press the B button to increase the blue tint and decrease the red tint.

When adjusting the phase:

Press the + or - button to adjust the phase.

CFunction selection switches

1.[AGC] Auto-gain control switch. Setting this switch to AONB automatically increases the sensitivity even when the brightness of the subject is insufficient. (Default setting: ON)

2.[SELECT] WHT.BAL./PHASE setting switch.

WHT.BAL.:

The B [R/B, +/-] buttons are used as [R/B] adjustment buttons.

PHASE:

The B [R/B, +/-] buttons are used as [+/-] adjustment buttons.

(Default setting: WHT.BAL.)

3.[SYNC] Synchronization system selection switch.

This switch sets the synchronizing system for the camera.

INT:

This is set for internal synchronization

LL (Line Lock):

The camera’s vertical synchronization is locked to the AC 24 V 60 Hz power line frequency. When switching between multiple cameras using a switcher, selecting this mode and adjusting the vertical phase can reduce the monitor sync disturbances occur that when the camera image is switched.

(Default setting: INT)

10

Image 10
Contents TK-C215V4 TK-C215V12 For Customer UseSafety Precautions Business users Other Countries outside the European UnionInformation for USA  Information Important Safeguards Contents Characteristics Operating Precautions Note on consumable parts TK-C215V12 onlyName of Parts CameraCamera Interior B, +/- R/B, +/- adjustment button Setting the Lens Switches TK-C215V4RESET/SPOT RESET/SPOT button Sync Synchronization system selection switchDAY/NIGHT Easy Day & Night switch WHT.BAL. ATW/MANUAL selection switchBLC Backlight compensation switch RESET/SPOT RESET/SPOT Correction selection switchAlarm Position status indication lamp Setting the Lens and Switches TK-C215V12Position Select Position Select button Alarm alarm input mode selection switch TriggerDC 12 V or AC 24 V power supply cable Video signal cablesAbout Connection Cables Electrical Specifications of Alarm Input Terminals ‹ Polarity of alarm signalsSystem diagram Video MonitorGetting Started Mounting the CameraSelecting a mounting method  Setup Embedding the camera to the ceiling Adjusting Images  Connecting Mounting Open a hole in the ceiling. R 30 mm, 1 1/8 inches Turn the camera unit in the clockwise direction Fasten the camera by tightening the camera fastening screwAdjusting Images When mounting the camera to the electrical boxMount by allowing the cable to exit from the side Adjusting the camera direction Adjusting ImagesMounting the test monitor Adjusting focus Adjusting the field angle/focus/ brightness  TK-C215V4Adjusting field angle Adjusting brightness TK-C215V12 BAdjust the focusAdjust the brightness ‹ Registering home position TK-C215V12 ‹ Registering alarm position Mount the inner dome Mounting the Inner DomeMounting the Dome Cover Mount the dome cover‹ TK-C215V4 White-spot correction‹ TK-C215V12  Lens Specifications Camera  General‹ When cover is attached  External Dimensions Unit mm inches‹ When embedded Focus chart TK-C215V4/TK-C215V12 Dome Camera

LST0420-001B specifications

The JVC LST0420-001B is a remarkable display solution that stands out in the realm of advanced visual technology. This model serves as a versatile option for various commercial and entertainment applications, delivering enhanced imagery and performance.

One of the main features of the LST0420-001B is its high-resolution display. It boasts a resolution of 1920 x 1080 pixels, ensuring that every detail is captured with stunning clarity. This is particularly beneficial for applications requiring sharp visuals, such as presentations, advertisements, and digital signage.

The LST0420-001B incorporates cutting-edge LCD panel technology, which enhances color accuracy and uniformity. This panel delivers vibrant colors and deep blacks, making it ideal for a range of environments, from brightly lit spaces to dimly lit rooms. The wide viewing angles provide flexibility, allowing multiple viewers to enjoy consistent picture quality from various positions.

Additionally, this model features advanced connectivity options. It includes multiple HDMI and VGA inputs, catering to a broad spectrum of devices and allowing for seamless integration into existing setups. This versatility ensures that users can easily link the LST0420-001B with computers, media players, and other electronic devices, further enhancing its utility.

Moreover, the LST0420-001B is equipped with smart energy-saving technology. This feature helps reduce power consumption during operation, making it a more environmentally friendly option while also lowering operational costs over time.

Durability is another notable characteristic of the JVC LST0420-001B. Its robust construction ensures reliability even in high-usage settings, making it suitable for locations such as conference rooms, event spaces, and public displays. The long lifespan of its components translates to reduced maintenance needs and an overall lower total cost of ownership.

In terms of user experience, the LST0420-001B is designed with an intuitive interface, enabling easy navigation and control. This user-friendliness enhances productivity, allowing users to focus on delivering impactful presentations or engaging displays without being bogged down by complicated operation processes.

Overall, the JVC LST0420-001B combines impressive visuals, advanced connectivity, energy efficiency, and durability, making it an ideal choice for businesses and organizations seeking a reliable display solution. Whether for commercial use, education, or entertainment, this model continues to impress with its performance and features.