JVC KY-F550 Comparison of PTZ system between KY-F560 & AW-E600, Camera KY-F560 AW-E600, AW-RP501

Ver1.1

Comparison of PTZ system between KY-F560 & AW-E600

	Configuration		JVC		Pana
	Camera		KY-F560		AW-E600
	Lens		YH19x6.7KTS		YH19x6.7KTS
	PTZ housing		CPT-70F-02A/UTB-219A-02A		AW-PH300A
			UTU-427D-01
	Controller		E0P-102J-60B		AW-RP501
			JVC		Pana
		Power is supplied via exclusive multi core cable from		Power is supplied via simple twist pair cable from AC
Power supply		AC adapter. The connector of this cable is reliable with		adapter. But, this cable looks cheap and is unreliable
		lock mechanism and easy to connect and disconnect.		without any connector and is recommended to be fixed
				by soldering.
Zoom, Focus		The style of levers for Zoom, Focus and Pan/Tilt are		The style of levers for Zoom, Focus and Pan/Tilt is
		different each other and is easy to operate		completely identical and easy to misoperate.
and PT levers
		ergonomically.
		Menu cannot be adjusted from remote controller, but it		Menu cannot be adjusted from remote controller.
		is possible to set locally without any restriction.		Moreover, if remote interface cable is connected, it
Menu setting				also does not work. In order to set menu locally, it is
				necessary to provide power from another AC adapter.
				It is very incovenient.
		Optional tally is located at the top of PTZ and is large		Provided tallies are located at the front and back of
Tally		and visible from every direction regardless of the		PTZ. But, both are too small and may not be visible
		position of camera. Tally signal line is included in the		when the camera covers it. And, it is required to
indication
		multi core cable and no necessary to connect another		connect another lines.
		line.
Shutter mode		Shutter modes can be selected from controller except		Shutter select items are 1/100(120) and EEL only from
		1/100(120) mode.		controller.
Genlock		Genlock can be adjusted locally only.		Genlock can be adjusted from controller.
Speed		Manual operation is only possible to adjust the speed		Speed select switch is useful to control each levers at
override		of each levers.		lower or higher speed smoothly.
Iris		Manual iris can be adjusted by button step by step.		Manual Iris can be adjusted by volume variably and
adjustment				smoothly.
Cable clamp		No cable clamp adjustment		Cable clamp adjustment is possible.
Scene file		No scene file on conreoller.		4 scene file memories are available on controller.
ABC		No ABC function.		ABC can be controlled from controller.
ATW memory		No ATW memory		2 ATW memories are available on controller.
Tally		No tally indication on controller.		Tally indication can be confirmed on controller.
indication on						16
controller