3. Alarm IN/OUT connection
Connect external devices to the alarm IN/OUT as shown below.
Sensor insert button
External
device OUT 1
External
device OUT 2
External
device
IN
●Cable connection and disconnection
Press the sensor insert button when connecting and disconnecting cables. After connecting or disconnecting, make sure the sensor insert button returns to its original position.
●About the alarm IN/OUT connection cables
•Length: use cables with a length of 50m or less.
•Recommended model: UL1007, UL1015 or equivalent cable with wire equivalent to AWG #22 - AWG #18.
Caution
External noise may affect the alarm working properly even with a cable length of 50m or less. In such cases, it is necessary to either change to the use of shielded cable to prevent influence by noise or to change the wiring route to avoid passing close to the source of the noise.
14