Picture Adjust, Atr, Motion DET, Privacy

Menu Settings

If HLC is selected, HLC is activated automatically when the camera detects high-luminance.

3.5 PICTURE ADJUST

PICTURE ADJUST allows you to adjust picture settings for optimal image. In the PICT ADJUST submenu, you can adjust BRIGHTNESS, CONTRAST, SHARPNESS, HUE and GAIN value. In addition, you can set MIRROR to ON to reflect the image.

MIRROR	OFF
BRIGHTNESS	000
CONTRAST	128
SHARPNESS	128
HUE	128
GAIN	128
RETURN

3.6 ATR

Set ATR (Adaptive Tone-curve Reproduction) function. You can select ON or OFF. The default is OFF. If selecting ON, you will enter the ATR submenu, where you can set LUMINACE and CONTRAST to optimize by image.

LUMINANCELOW

CONTRASTLOW

RETURN

*Also known as Wide Dynamic Range. This function expands the video dynamic range of the camera and improves visibility of images even in high contrast environments.

3.7 MOTION DET

MOTION DET allows to detect moving objects on the screen. The default is OFF. If selecting ON, you will enter the MOTION DET submenu. You can set up to 4 motion areas to detect moving objectives and adjust the motion detection sensitivity from 0 to 127.

3.8 PRIVACY

PRIVACY function mask up to 8 privacy areas on the screen from video monitoring. The default setting is OFF. If selecting ON, you will enter the PRIVACY submenu. You can configure up to 8 privacy areas and set color and transparency of the privacy zones. In addition, you can enable MOSAIC function for the privacy zone.

Note: If you enable MOTION DET function, then PRIVACY function will support 4 zones only.

REA SEL	1/8
TOP	000
BOTTOM	000
LEFT	000
RIGHT	000
COLOR	1
TRANSP	0.00
MOSAIC	OFF
RETURN