DELIVERY, Storage and Handling, Warranty

Section 28.23.29 Video Surveillance Remote Devices and Sensors

Specifier Note: Regulations specific to this section vary by geographic location and Owner requirements. Coordinate article below with Local Authority Having Jurisdiction and/or Owner for requirements. Edit or revise article below as required for a specific project or specifiers practice.

C.Regulatory Requirements:

1.Video Compression:

a.MPEG-4: Part 2 – ISO/IEC 1449602

b.MJPEG

2.Emission / Immunity:

a.FCC Part 15, Subpart B, Class A Digital Device

3.Transmission:

a.Ethernet: IEEE 802.3 / 802.3u / 802.3af

4.Safety:

a.UL Listed

5.Environmental Sustainability:

a.RoHS Directive Compliant

1.06DELIVERY, STORAGE AND HANDLING

A.General: Comply with Division 1, Section 01 61 00 Common Product Requirements and the manufacturers recommended procedures for receiving and protection of the equipment

B.Storage and Protection: Store materials protected from exposure to extreme or harmful environmental conditions and at temperature and humidity levels recommended by the manufacturer:

1.Deliver individual components in the manufacturers original packaging and labeling

2.Prevent physical damage, soiling or wetting

3.Provide secure storage prior to and during installation

1.07PROJECT/SITE CONDITIONS A. Environmental Requirements:

1.Site should be substantially enclosed and secure prior to installation of hardware

2.Environmental systems should be in place and operational

3.Deliver materials onsite at least 24 hours prior to installation to allow materials to reach temperature and humidity equilibrium

1.08WARRANTY

A. Provide original equipment manufacturers warranty documentation for acceptance by the Owner

Specifier Note: Coordinate sub-paragraph below with manufacturers warranty policies and procedures if different from General Conditions, specifically Division 01, Section 01 78 36 - Warranties

1. Warranty Period: [specify term] commencing with the Date of Substantial Completion

PART 2 PRODUCTS

2.01 INTERNET PROTOCOL CAMERA

All non-metric weights and measures are approximate. Features and specifications are subject to change with out notice.

MasterFormat, SectionFormat and PageFormat are trademarks of the Construction Specification Institute.

4 of 9

VN-X35U_v.2_1202