Dynamic, Condenser, Wireless, Output, Speakers

There are three microphone inputs, which can be used simultaneously:

DYNAMIC	- for standard dynamic cartridge microphones
CONDENSER	-	for electret or condenser microphones, which require phantom
WIRELESS		power (supplied from the amplifier)
WIRELESS	-	accepts line-level output from wireless microphone receiver
		(AmpliVox S1600 or equivalent)

LINE IN L+R (SEPARATE-COMBINED)

Combines the separate left and right AUX LINE IN channels. This combined signal will be amplified and appear on both the LEFT and RIGHT channels of the SPEAKER and LINE

OUT OUTPUTS.

AUXILIARY

If you desire to add pre-recorded music or sound effects during your presentation, just plug your CD player, tape player or computer sound card into the LINE IN jack. The LINE IN also has its own VOLUME and TONE control knobs, so that you may adjust the volume and tone to the appropriate level.

OUTPUT

If you desire to tape record your speech or program, (using cable with standard phono plug) connect the LINE OUT on the amplifier to the input on the tape recorder.

ANTENNA [SW805A]

Jack for wireless antenna. (Antenna supplied on ‘C’ Channel for mounting on either side of amplifier or use Velcro for optional mounting locations.)

INTERNAL WIRELESS RECEIVER[SW805A](on right side of case)

Power on and off and Frequency A-B switches. Frequency should match wireless transmitter

SPEAKERS

Two separately amplified speaker jacks (4-8 ohms).

PROBLEM SOLVING

HOWLBACK is the howl or screech often heard in sound reinforcement systems. It is caused by sound from the loudspeaker returning to the microphone. AmpliVox systems utilize proven acoustical principles to minimize this; however, there is no way to completely eliminate howlback under conditions of high amplification. If howlback occurs check the following:

1.User covering the head of the microphone. Hold microphone under head slots.

2.Sound can easily re-enter microphone. Keep loudspeaker turned toward audience. Note: sound can be reflected from hard surface back through the microphone. [Turn speaker]

3.User holding microphone in a reflecting position. [Turn microphone]

4.Volume setting too high. [Reduce microphone channel volume; compensate by speaking louder or closer to the microphone]

NO SOUND

Make sure amplifier POWER switch is turned on and red LED is lit. If switch is on and LED is not lit, check to see that front panel connector is properly seated, and verify that the power source is live.

IF YOU HAVE ANY QUESTIONS OR PROBLEMS PLEASE CALL OUR CUSTOMER SERVICE DEPARTMENT AT 1-800-267-5486

SW230A, S230A specifications

The AmpliVox S230A and SW230A are innovative portable sound systems designed to enhance audio experiences in various settings. These models are especially suitable for outdoor events, classrooms, conferences, and presentations, making them versatile tools for speakers and educators alike.

One of the standout features of the AmpliVox S230A is its robust audio amplification capability. With a powerful built-in amplifier, it delivers clear and loud sound, ensuring that every attendee hears the speaker, no matter the size of the crowd or the noise of the environment. The unit can output up to 50 watts, providing ample sound coverage for medium to large venues.

Both models come equipped with a durable battery that provides up to 20 hours of continuous use, allowing for uninterrupted speeches or presentations. This mobility is further enhanced by the lightweight, portable design, which makes it easy for users to transport the unit from room to room or even outside.

In terms of connectivity, the AmpliVox S230A and SW230A feature multiple input options. They include a wireless microphone system, which provides freedom of movement for speakers, as well as a wired microphone input. The system is also compatible with other audio sources, such as smartphones and laptops, thanks to Bluetooth connectivity in the SW230A model. This allows for smooth integration of multimedia presentations and background music.

Another noteworthy characteristic is the built-in amplifier's clear audio technology, which ensures crisp sound quality, reducing distortion even at higher volume levels. The rugged construction of the unit is designed to withstand the rigors of frequent transport and use, making it a reliable choice for event planners and educators.

For enhanced user experience, the AmpliVox models feature an intuitive control panel, allowing users to easily adjust volume settings and source selections. Additionally, the units come with a convenient carry handle and a compact design, which makes them user-friendly for all ages.

Overall, the AmpliVox S230A and SW230A systems are designed for durability, efficiency, and ease of use while providing exceptional sound quality. Whether in a classroom, at a corporate event, or during outdoor gatherings, these powerful amplification systems stand out as essential tools for effective communication.

DYNAMIC

CONDENSER

WIRELESS