JVC KA-F5602U, KA-F5603U manual S3125A

Page 2

1.Read all of these instructions.

2.Save these instructions for later use.

3.All warnings on the product and in the operating instructions should be adhered to.

4.Unplug this appliance system from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

5.Do not use attachments not recommended by the appliance manufacturer as they may cause hazards.

6.Do not use this appliance near water – for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc.

7.Do not place this appliance on an unstable cart, stand, or table. The appliance

may fall, causing serious injury to a child or adult, and serious damage to the appliance.

Use only with a cart or stand recommended by the manufacturer, or sold with the appliance.

Wall or shelf mounting should follow the manufacturer’s instructions, and should use a mounting kit approved by the manufacturer.

An appliance and cart combination should be moved with care. Quick stops,

excessive force, and uneven surfaces may cause the appliance and cart

combination to overturn.

S3125A

8.Slots and openings in the cabinet and the back or bottom are provided for

ventilation, and to insure reliable operation of the appliance and to protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the appliance on a bed, sofa, rug, or other similar surface. This appliance should never be placed near or over a radiator or heat register. This appliance should not be placed in a built-in installation such as a bookcase unless proper ventilation is provided.

9.This appliance should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company. For appliance designed to operate from battery power, refer to the operating instructions.

10.This appliance system is equipped with a 3-wire grounding type plug (a plug having a third (grounding) pin). This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding plug.

11.For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.

12.Do not allow anything to rest on the power cord. Do not locate this appliance where the cord will be abused by persons walking on it.

13.Follow all warnings and instructions marked on the appliance.

14.Do not overload wall outlets and extension cords as this can result in fire or electric shock.

15.Never push objects of any kind into this appliance through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the appliance.

16.Do not attempt to service this appliance yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

17.Unplug this appliance from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a.When the power cord or plug is damaged or frayed.

b.If liquid has been spilled into the appliance.

c.If the appliance has been exposed to rain or water.

d.If the appliance does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the appliance to normal operation.

e.If the appliance has been dropped or the cabinet has been damaged.

f.When the appliance exhibits a distinct change in performance – this indicates a need for service.

18.When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

19.Upon completion of any service or repairs to this appliance, ask the service technician to perform routine safety checks to determine that the appliance is in safe operating condition.

2

Image 2
Contents KA-F5602U KA-F5603U S3125A Safety Precautions for USA and Canada Safety Precautions for Europe Port Cable Length Model SDI Output Terminal KA-F5602U Nil KA-F5603U Yes Main FeaturesEquipped with analog 26P camera connector Multi-system outputContents Related Products used in Conjunction with this Unit AccessoriesGetting Started  Studio Kit main body When Gain-lock signal is input into RM- P210 PrecautionsRegarding Gain-lock Signal and adjustment of System Phase  When Gain-lock signal is input into KY F560Part Names and Functions Incom Level Intercom Receiver VolumeIncom MIC Intercom Mic ON/OFF Switch Intercom Intercom Input Terminal XLR 5 PinCall Call Button Incom MIC Intercom Mic CARBON/ Dynamic SwitchCall Indicator Camera Mounting Frame Relay Board$ Prompter Output Prompter Output Terminal BNC DC Input DC Power Input Terminal XLR 4 PinBreaker Breaker Switch Screw Holes for Mounting TripodInstallation SystemInstallation Procedures Mounting KY-F560 Camera on this UnitSlot Relay board Lever Mounting the Lens onto the Camera Mounting this Unit onto the TripodMounting VF-P400 4-inch Viewfinder on this Unit Setting  Menu screen setting Connecting RM-P210Connecting to Remote Control Unit RM-P210 Connection Pin camera cableThis unit  Switch settingVolume OperationConnecting RM-P210 System Menu Screen Settings in bold are factory settingsMenu Screen Menu Screen Display Menu ScreenOthers SpecificationsDimensions Unit mm Memo スタジオキット スタジオSDIキット お買い上げいただきありがとうございます。 主な特長メニュー画面 付属品をご確認ください 本機を使用するための関連商品正しくお使いいただくためのご注意 ゲンロック信号およびシステム位相調整についてはじめに 各部の名称と働き各部の名称と働き(つづき) DC INPUTDC電源入力端子(XLR4ピン システム ビデオ機器取り付けの手順 本機にKY-F560カメラを取り付ける本機にKY-F560カメラを取り付ける(つづき) カメラにレンズを取り付ける 本機を三脚に取り付ける本機に4型ビューファインダーVF-P400を取り付ける RM-P210接続 リモートコントロールユニットRM-P210を接続するリモートコントロールユニットRM-P210を接続する(つづき) 本機背面RM-P210接続 メニュー画面 メニュー画面 その他 保証とアフターサービスその他 Japanese 2 0 2 8 2 8 1 KA-F5602U/KA-F5603U
Related manuals
Manual 47 pages 56.16 Kb

KA-F5603U, KA-F5602U specifications

The JVC KA-F5602U and KA-F5603U are powerful frame synchronizers and converters that cater to the professional broadcast and production industries. With their advanced features and superior technologies, these models are designed to enhance video processing capabilities, making them essential tools for high-quality video production.

One of the main features of the JVC KA-F5602U is its ability to handle a wide range of video formats. This model supports a variety of input signals, including HD-SDI, SD-SDI, and composite signals, enabling seamless integration into any broadcasting setup. The KA-F5603U further expands on this capability with additional support for 3G-SDI inputs, ensuring compatibility with even higher resolution formats.

Both models come equipped with real-time frame synchronization technology, which is crucial for ensuring that video signals are perfectly aligned, minimizing any lag or drift. This feature is especially important for live broadcasts or multi-camera setups where precision timing is necessary. The synchronization ensures that video and audio remain in perfect sync, even when switching between different sources.

Another significant characteristic of the KA-F5602U and KA-F5603U is their advanced up/down/cross conversion capabilities. This allows users to convert video signals between different formats without compromising on quality. Whether switching from 1080p to 720p or from standard definition to high definition, these models maintain the integrity of the original content.

Furthermore, both devices include various processing features such as frame rate conversion, which can adjust the frame rate of incoming signals to match the desired output. This is particularly valuable in mixed-format environments where compatibility across various systems is essential. The user-friendly interface provides easy access to these extensive processing options, making operation straightforward for any professional, regardless of their technical expertise.

In terms of connectivity, the KA-F5602U and KA-F5603U are designed to integrate seamlessly with other broadcast equipment. They feature multiple output options, including HD-SDI, as well as embedded audio support, which allows for enhanced audio integration. Reliable performance, robust build quality, and user-oriented features make these models stand out in the crowded field of video processing equipment, ensuring that they meet the demanding needs of today’s broadcasters and content creators.