JVC GR-AX301, GR-AX501, GR-AX401, GR-AX201 manual 26 EN

26EN

RECORDING

AdvancedFeatures(cont.)

Menu Screen Available Using The MENU Button (cont.)

DATE/TIME		Allows you to set the current date and time (☞ pg. 7).
TAPE LENGTH		Allows you to set the tape length depending on the tape used (☞ pg. 8).
REC TIME		This feature allows you to set the parameters for Animation and Time-Lapse
		recording (☞ pg. 33).
INT. TIME		This feature allows you to set the parameters for Self-Timer (☞ pg. 32) and Time-
		Lapse recording (☞ pg. 32, 33).
TALLY LAMP		OFF	The tally lamp remains off at all times.
		ON	The tally lamp comes on to signal the start of recording.
JLIP ID NO.		This number is necessary when connecting the camcorder to a device such as a computer
		using the J terminal (JLIP). The numbers range from 01 to 99. Factory setting is 07.
DEMO MODE		OFF	Automatic demonstration will not take place.
		ON	Demonstrates certain functions such as Fade/Wipe, etc. When
			“DEMO MODE” is set to “ON” and the Menu Screen is closed,
			the demonstration starts.
			NOTES:
			● When a tape whose Erase Protection tab is in the position that
			allows recording is loaded in the camcorder, demonstration is
			not available.
			● By turning off the camcorder or inserting a tape whose Erase
			Protection tab is in the position that allows recording into it,
			“DEMO MODE” is set to “OFF” automatically.
			● During the demonstration, all functions except zoom are
			disabled.
	: Factory-preset